NETGEAR WMS105-10000S user manual Editing a Security Profile

Page 19

ProSafe 5 AP Wireless Management Software WMS105

3.Select the Enable checkbox to enable (or disable) the corresponding profile.

4.To change the settings of a security profile, select the profile and click the Edit button.

Editing a Security Profile

This lets you change the Security Profile settings of the profile that you selected on the Profile Settings page.

•Name: A unique name for the Security Profile, up to 32 alphanumeric characters. Use meaningful names instead of the default names. The default profile names are Profile1, Profile2, and so on.

•Wireless Network Name (SSID): The name of the wireless network associated with this profile.

•Broadcast Wireless Network Name (SSID): Enabled by default. If set to Yes, the SSID is broadcast. If you disable broadcast of the SSID, only devices that have the correct SSID can connect to the access point.

•Network Authentication: The authentication type to be used. See Table 2 on page 20.

•Data Encryption: The data encryption type to be used. The options available for data encryption depend on the Network Authentication settings. See Table 2 on page 20.

•Wireless Client Security Separation: If enabled, the associated wireless clients will not be able to communicate with each other. This feature is intended for hot spots and other public access situations.

•VLAN: The default VLAN ID to be associated with this security profile. This must match the VLAN ID used by other network devices.

Chapter 4: Security Configuration 19

Image 19

Contents ProSafe 5 AP Wireless Management Software WMS105 Technical Support NETGEAR, Inc Table of Contents Index Getting Started Installing the SoftwareGeneral Settings System SettingsLogging Time Settings Syslog Settings Auto Discovery Access Point DiscoveryTo use Auto Discovery IP DiscoveryTo use IP Discovery Discovery ResultsAdding Access Points Configuring Centralized RF Management Wireless ConfigurationProSafe 5 AP Wireless Management Software WMS105 To manually specify the Wlan parameters for access points Advanced Wireless SettingsSend packet before sending the actual packet data QoS for Managed Access Points Configuring QoSTo specify QoS settings Security Profiles List Security ConfigurationTo view or change security profiles Editing a Security Profile Network Authentication and Data Encryption Rogue Access PointsMAC Authentication To set up MAC Authentication To configure Radius Server Settings Radius Server SettingsTo set up guest access Configuring Guest AccessMonitoring Access Point SummarySummary Access Point Status Wireless StationsProfile Information Access Point Status DetailsClient Status Monitoring Rogue Access PointsProSafe 5 AP Wireless Management Software WMS105 Changing Passwords MaintenanceTo change the password Snmp ResetRemote Management Upgrading Access Point FirmwareTo upgrade the access point software To restore settings from a backup file Backing up Configuration SettingsRestoring Settings from a File To back up the Wireless Management Software settingsTo download logs Downloading Wireless Management Software LogsTo change the settings Using Discovery OUIAccess Point Supported Firmware Versions Access Point CompatibilitySSH Software Features and Access Point CompatibilityIndex Index