N300 Wireless ADSL2+ Modem Router DGN2200v3
Select Advanced > Wireless Repeating Function to display the following screen:
•Enable Wireless Repeating Function. Select this check box if you want to use the wireless repeating function.
•Disable Wireless Client Association. If your modem router is the repeater, selecting this check box means that wireless clients cannot associate with it. Only LAN client associations are allowed.
-If you are setting up a
-If you want all client traffic to go through the other access point (repeater with wireless client association), leave this check box cleared.
•Wireless MAC of this router. This field displays the MAC address for your modem router for your reference. You will need to enter this MAC address in the corresponding Wireless Repeating Function screen of the other access point you are using.
•Wireless Repeater. If your modem router is the repeater, select this check box.
•Repeater IP Address. If your modem router is the repeater, enter the IP address of the other access point.
•Base Station MAC Address. If your modem router is the repeater, enter the MAC address for the access point that is the base station.
•Wireless Base Station. If your modem router is the base station, select this check box.
•Disable Wireless Client Association. If your modem router is the base station, selecting this check box means that wireless clients cannot associate with it. Only LAN client associations are allowed.
•Repeater MAC Address (1 through 4). If your modem router is the base station, it can act as the “parent” of up to 4 other access points. Enter the MAC addresses of the other access points in these fields.
Advanced Settings
94