NETGEAR DGN2200V3, N300 user manual Repeater with Wireless Client Association

Page 97

N300 Wireless ADSL2+ Modem Router DGN2200v3

e.Click Apply.

2.Set up AP 2 and AP 3 to be wireless repeaters.

a.In the Wireless Repeating Function screen for AP 2 and AP 3, select the Enable Wireless Repeating Function check box.

b.Select the Wireless Repeater radio button.

c.Select the corresponding Disable Wireless Client Association check box.

d.Enter the MAC addresses for your modem router in the Base Station MAC Address field.

e.Click Apply.

3.Disable the DHCP server on AP 2 and AP 3. AP 1 will then be the DHCP server.

4.Verify the following for all access points:

• The modem router and other access points operate in the same LAN network address range as the LAN devices.

• Only one access point, your modem router in Figure 10, Multi-point bridge example, is set up as the base station. The others are set up as repeaters.

• All access points, including your modem router, are on the same LAN. That is, all the access point LAN IP addresses are in the same network.

• If you are using DHCP, all access points should be set as DHCP clients. This setting is Obtain an IP address automatically (DHCP Client) in the Basic Settings screen.

• All access points, including your modem router, use the same SSID, channel, authentication mode, if any, and WEP security settings if security is in use.

5.Verify connectivity across the LANs. A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three LAN segments.

Note: Wireless stations configured as in Figure 9 on page 95 cannot connect to the modem router or access points. If you want wireless stations to access any LAN segment, use additional access points in any LAN segment.

Repeater with Wireless Client Association

In the repeater mode with wireless client association, your modem router sends all traffic to a base station access point. You can set up the modem router as either the base station (parent) or as the repeater (child) access point.

Note that the following restrictions apply:

•You do not have the option of disabling client associations with this modem router.

•You cannot configure a sequence of parent-child APs. You are limited to only one parent access point, although if your modem router is the parent access point, it can connect with up to four child access points.

Advanced Settings

97

Page 96 Page 98
Image 97
Page 96 Page 98
Contents N300 Wireless ADSL2+ Modem Router DGN2200v3 Trademarks Technical SupportStatement of Conditions Contents Security Settings USB Storage Appendix a Supplemental Information Hardware Setup Unpack Your Modem Router Hardware FeaturesLabel Front Panel Back PanelN300 Wireless ADSL2+ Modem Router DGN2200v3 Front Panel LEDs WPS Modem Router StandAdsl Microfilters Position Your Modem RouterTwo-Line Adsl Microfilter One-Line Adsl MicrofilterSummary  To cable the modem router Cable Your Modem RouterAdd power to the modem router Verify the Cabling Modem Router Setup Use Standard TCP/IP Properties for Dhcp Modem Router Setup PreparationReplace an Existing Modem and Router Gather ISP InformationView or Change Settings Netgear Genie SetupSettings Description  To log Log In to the Modem Router To upgrade the firmware Upgrade Modem Router FirmwareModem Router Interface  To use the Setup Wizard Setup WizardManual Setup Basic Settings Does Your ISP Require a Login? Answer either yes or no ISP does not require login ISP does require loginInternet IP Address When a login is required, these fields display To manually specify the Adsl settings Adsl Settings To change the password and login time-out Change Password and Login Time-OutUnsuccessful Internet Connection Log Out Manually Types of LoginsWireless Adapter Compatibility Wireless SettingsTurn Off Wireless Connectivity Preset SecuritySecurity Basics Restrict Access by MAC Address Disable Ssid BroadcastWireless Security Options Add Clients Computers or Devices to Your Network To join the wireless network Wi-Fi Protected Setup WPS Method To join the wireless network using a WPS button Manual MethodWireless Settings Screen  To view or change wireless settings View or Change Wireless SettingsConsider Every Device on Your Network Wireless Network Wireless Settings Screen FieldsSecurity Options Settings  To change the WPA Security Option and passphrase  To set up WEP securityWireless Guest Networks N300 Wireless ADSL2+ Modem Router DGN2200v3 Security Settings Logs Examples of Log Messages Activation and AdministrationDropped Packets Keyword Blocking of Http Traffic  To block sites using keywords Select Security Block Sites To delete a keyword or domain  To specify a trusted computerSet Up Firewall Rules Firewall Rules to Control Network Access To set up firewall rules Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local ServersAdd a Custom Service Edit or Delete a Port Forwarding Entry Click Edit Service or Delete ServiceApplication Example Make a Local Web Server Public  To edit or delete a port forwarding entry To enable port triggering Set Up Port Triggering To add a port triggering service Clear the Disable Port Triggering check boxN300 Wireless ADSL2+ Modem Router DGN2200v3  To set the time zone Select Security Schedule Set the Time Zone To schedule services Select Security Schedule Schedule ServicesEnable Security Event Email Notification N300 Wireless ADSL2+ Modem Router DGN2200v3 Network Maintenance Automatic Firmware Check Upgrade the Modem Router Firmware To stop automatic firmware checking Manually Check for Firmware Upgrades To back up the modem router configuration file Back Up and Manage the Configuration File To erase the configuration  To restore the configuration fileView Router Status Wireless Port Internet Port SettingsLAN Port Local Ports ModemPort Show StatisticsAdsl Link Downstream or Upstream View Attached Devices Authentication. On or OffConnection Status Select Maintenance Attached Devices Run Diagnostic UtilitiesUSB Storage USB Drive Requirements ReadySHARE AccessSharing Photos File-Sharing ScenariosStoring Files in a Central Location for Printing  To share files with your friends and familySharing Large Files over the Internet USB Storage Basic SettingsN300 Wireless ADSL2+ Modem Router DGN2200v3  To edit a network folder Edit a Network FolderAccess Method USB Storage Advanced SettingsAvailable Network Folders Create a Network Folder To create a network folder Safely Remove USB Drive Media Server SettingsSelect the Allow only approved devices check box Approved USB Devices Advanced USB SettingsSelect Maintenance Router Status Connect to the USB Drive with Microsoft Network SettingsConnect to the USB Drive from a Remote Computer Enabling File and Printer SharingConfiguring Windows 2000 and Windows XP Configuring Windows 98SE and Windows MEAdvanced Settings WAN Setup  To assign a computer or server to be a default DMZ server Default DMZ ServerSelect the Use a Dynamic DNS Service check box  To set up Dynamic DNSDynamic DNS  To change the LAN settings Select Advanced LAN Setup LAN SetupLAN IP address IP Address Reservation LAN Setup Screen Settings To reserve an IP address  To set up QoS Select Advanced QoS Setup Quality of Service QoS To edit or delete a reserved address entry Click Edit or DeleteN300 Wireless ADSL2+ Modem Router DGN2200v3 Advanced Wireless Settings Advanced Wireless Settings To view or change advanced wireless settings Wireless Card Access List WPS Settings To set up a wireless card access list Remote Management Static Route Example Static Routes To add a static route Universal Plug and Play  To set up UPnP Traffic Meter Wireless Bridging and Repeating Networks N300 Wireless ADSL2+ Modem Router DGN2200v3  To set up a point-to-point bridge configuration Set Up a Point-to-Point Bridge To set up the multi-point bridge configuration Set Up a Multi-Point BridgeRepeater with Wireless Client Association Repeater example  To set up a repeater with wireless client association To change the device mode Change the Device ModeTroubleshooting Power LED Is Off Troubleshooting with the LEDsPower LED Is Red LAN LED Is Off Cannot Log In to the Wireless-N Modem RouterAdsl Link Troubleshooting the Internet ConnectionAdsl Link LED Is Green Adsl Link LED Is Blinking GreenInternet LED Is Red Troubleshooting PPPoE or PPPoAObtaining an Internet IP Address TCP/IP Network Not Responding Troubleshooting Internet BrowsingTest the LAN Path to Your Modem Router Ping Test the Path from Your Computer to a Remote DeviceIncorrect Date or Time Changes Not SavedSupplemental Information Factory Default Settings Factory SettingsBest Specification Description SpecificationsNotification of Compliance 113 FCC Information to User FCC Requirements for Operation in the United StatesImportant Note Radiation Exposure Statement Industry CanadaGPL License Agreement Interference Reduction Table Index 118 119 120
Related manuals
Manual 2 pages 44.57 Kb

DGN2200V3, N300 specifications

The NETGEAR N300 is a high-performance wireless router designed for home and small office use, offering impressive speeds and connectivity for various online activities. With a maximum wireless speed of up to 300 Mbps, it caters efficiently to activities such as streaming HD video, online gaming, and browsing the web. This makes the N300 a versatile choice for users with demanding bandwidth needs.

One of the standout features of the NETGEAR N300 is its compatibility with a range of devices, including laptops, smartphones, tablets, and gaming consoles. The router supports both wired and wireless connections, ensuring that users can connect a variety of gadgets using Ethernet cables or through 802.11n Wi-Fi technology. This dual-band capability enhances flexibility, allowing users to choose the best connection type based on their needs.

The N300 incorporates advanced technologies to optimize performance. Equipped with SpeedBoost technology, it delivers improved range and reliability by adjusting the wireless signal strength. This ensures a stable connection throughout larger homes or office spaces, reducing interruptions and enhancing user experience. The router also features QoS (Quality of Service), which prioritizes bandwidth for high-demand applications, ensuring that streaming and gaming receive the necessary resources for a seamless experience.

Security is a significant concern for many users, and the NETGEAR N300 addresses this with robust security features. It employs WPA/WPA2 encryption for safe wireless communication, protecting sensitive data from potential intruders. Additionally, the router includes a built-in firewall, providing an extra layer of defense against external threats.

Installation and setup are straightforward, thanks to the intuitive web interface and support for multiple languages. Users can quickly configure their network settings, manage connected devices, and monitor performance through a user-friendly dashboard. Additionally, the N300 is equipped with a USB port that enables file sharing and media streaming across the network.

Overall, the NETGEAR N300 is an excellent choice for anyone looking to enhance their home or small office network with reliable performance, strong security, and flexibility. Its combination of speed, range, and user-friendly features makes it a standout option in the wireless router market, catering to the needs of diverse users.
Top Page Image Contents