NetComm NB504 manual Successful result of Ping command

Open a command prompt, and type ping 192.168.1.1, then press Enter.

If the result displayed is similar to that shown in figure 4-1, the connection between your PC and the router has been established.

Figure 4-1 Successful result of Ping command

If the result displayed is similar to that shown in figure 4-2, it means that your PC has not connected to the router.

Figure 4-2 Failed result of Ping command

Please check it following these steps:

1.Is the connection between your PC and the router correct?

Note: The 1/2/3/4 LEDs of LAN por�t which you link to on the r�outer� and LEDs on your� PC’s adapter� should be lit.

2.Is the TCP/IP configuration for your PC correct?

Note: If the r�outer�’s IP addr�ess is 192.168.1.1, your� PC’s IP addr�ess must be within the r�ange of 192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1

YML864 Rev1	����NB504 ��User�� Guid����e
www.netcomm.com.au	13