5.12.8 Statistics
The Statistics page (shown in figure
Figure 5-60 Statistics
•Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the function of DoS protection in Security settings will be ineffective.
•Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull- down list. The Packets Statistic interval indicates the time section of the packets statistic.
•Sorted Rules - Select sorted rule of statistics results as your desired.
Statistics Table:
IP Address | The IP Address displayed with statistics | |
|
|
|
Total | Packets | The total amount of packets received and transmitted by the router. |
|
|
|
| Bytes | The total amount of bytes received and transmitted by the router. |
|
|
|
Current | Packets | The total amount of packets received and transmitted in the last Packets |
|
| Statistic interval seconds. |
|
|
|
| Bytes | The total amount of bytes received and transmitted in the last Packets |
|
| Statistic interval seconds. |
|
|
|
| ICMP Tx | The total amount of the ICMP packets transmitted to WAN in the last |
|
| Packets Statistic interval seconds. |
|
|
|
| UDP Tx | The total amount of the UDP packets transmitted to WAN in the last |
|
| Packets Statistic interval seconds. |
|
|
|
| TCP SYN Tx | The total amount of the TCP SYN packets transmitted to WAN in the last |
|
| Packets Statistic interval seconds. |
|
|
|
Click the Save button to save the Packets Statistic interval value.
Click the
Click the Refresh button to refresh immediately.
YML864 Rev1 | ����NB504 ��User�� Guid����e |
www.netcomm.com.au |