NetComm NB504 manual Rear Panel

2.3.2 The Rear Panel

The rear panel contains the following features. (View from left to right:)

•AC power socket: only use the power adapter supplied with the NB504 54Mbps Wireless Router, use of a different adapter may result in product damage.

•Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs

•RJ45 WAN port for connecting the router to a cable, DSL modem, or Ethernet

•Factory Default Reset button

•There are two ways to reset the router’s factory defaults:

1)Use the Factory Defaults function on System Tools -> Factory Defaults page in the router’s Web- based Utility.

2)Use the Factory Default Reset button: First, turn off the router’s power. Second, press and hold the default reset button then turn on the router’s power, until the System LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot.

Note: Ensur�e the r�outer� is power�ed on befor�e it r�estar�ts completely.

•Wireless antenna

YML864 Rev1	����NB504 ��User�� Guid����e
www.netcomm.com.au