NetComm NB504 manual Find IP & MAC Binding Entry

To add IP & MAC Binding entries:

1.Click the Add New.. button.

2.Enter the MAC Address and IP Address.

3.Select the Bind checkbox.

4.Click the Save button to save it.

To modify or delete an existing entry:

1.Find the desired entry in the table.

2.Click Modify or Delete as desired on the Modify column. To find an existing entry:

1.Click the Find button (shown in Figure 5-43).

2.Enter the MAC Address or IP Address.

3.Enter the Find button in the next page (shown in Figure 5-45).

Figure 5-45 Find IP & MAC Binding Entry

Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries.

YML864 Rev1	����NB504 ��User�� Guid����e
www.netcomm.com.au	65