3.If you choose PPPoE, you should enter the following parameters (figure
Figure 5-6 WAN - PPPoE
•User Name/Password - Enter the User Name and Password provided by your ISP. These fields are
•Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications ar�e visiting the Inter�net continually in the backgr�ound.
•Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button.
•
Note: Only when you have configur�ed the system time on System Tools
•Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect from the Internet connection, and you will not be able to
to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter “0” in the Max Idle Time field. Otherwise, enter the number time in minutes that you wish to have the Internet connecting last unless a new link is requested.
Caution: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time, since some applications ar�e visiting the Inter�net continually in the backgr�ound.
YML864 Rev1 | ����NB504 ��User�� Guid����e |
www.netcomm.com.au | � |