NetComm NB504 manual Reboot the router

5.12.5 Reboot

This page (shown in figure 5-57) allows you to reboot the router.

Figure 5-57 Reboot the router

Click the Reboot button to reboot the router.

Some settings of the router will take effect only after rebooting, which include:

•Change LAN IP Address. (System will reboot automatically)

•MAC Clone (system will reboot automatically)

•DHCP service function.

•Static address assignment of DHCP server.

•Web Service Port of the router.

•Upgrade the firmware of the router (system will reboot automatically).

•Restore the router’s settings to factory default (system will reboot automatically). 5.12.6 Password

This page (shown in figure 5-58) allows you to change the factory default user name and password of the router.

Figure 5-58 Password

It is recommended strongly that you change the factory default user name and password of the router. All users who try to access the router’s web-based utility or Quick Setup will be prompted for the router’s user name and password.

Note: The new user� name and password� must not exceed 14 char�acters� in length and must not include any spaces. Enter� the new Password� twice to confir�m it.

Click the Save button when finished.

Click the Clear All button to clear all.

YML864 Rev1	����NB504 ��User�� Guid����e
www.netcomm.com.au	�