Installation
3-4 VGA Card Installation
Important: Please read through the instruction below before you start installing the VGA card.
To install a single VGA card in Single Mode, insert the VGA into the "Primary" VGA slot. (labeled on the board)
In Single mode the “Secondary” VGA slot will become inactive.
<Figure 7>
When installing the VGA card, make sure the card edge connector is fully inserted into the slot and the clicker is locked properly.
<Figure 8>
To install the dual VGA card in SLI Mode mode, insert into both "Primary" and "Secondary" VGA slot.
<Figure 9>
Page