Multi-Tech Systems MVPGSM-2 manual GSM Instructions, Activate Your Wireless Account, Phone Numbers

Page 10

Chapter 2: Installation & Activation

GSM Instructions

Step 1 – Activate Your Wireless Account

Select a wireless network provider and follow their directions to activate your account and receive your SIM cards.

Phone Numbers

Every channel will have its own unique phone number. The phone number may simply be given to you by your wireless service provider or it may be on the SIM card or both. Wireless provider implementations may vary.

Step 2 – Installing the SIM Cards

The MVPGSM requires the power supply connection to begin operation. It also requires a SIM card (Subscriber Identity Module) to operate on a GSM network. To install the modem, do the following:

1.Turn the unit off and disconnect the power cord. Remove the three highlighted screws from the back as shown below.

2.Slide the cover forward and up to remove it.

3.Insert the SIM cards into the units at the front of the MVPGSM.

4.Verify that the SIM cards fit into their holders properly and then replace the cover. Attach the power cord.

Step 3 – Check Signal Strength

Turn the unit on and verify that the Power LED is lit and that the Boot sequence is finished (Boot LED is no longer active), then wait for the Link Status (LS) LED to show that the MVPGSM channel is registered on the wireless network (flashing 75 ms on and 3 seconds off). Once registered, the Signal Strength LEDs should be referenced for the strength of signal in its current location.

Caution: Before final placement or mounting, ensure that the wireless signal strength is strong enough for the chosen area. If no LEDs are lit, there is insufficient signal strength for proper operation. If one or more are lit, then there is good signal strength and operation will not be impaired. Finding a location with the strongest signal strength is desirable.

Multi-Tech Systems, Inc.

MVPGSM

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MultiVOIP GSM Copyright 2008, by Multi-Tech Systems, Inc WarrantyS000450A Revision Date DescriptionContents Front Panel LEDs Description and SpecificationsIntroduction Front Panel LED Definitions DescriptionAntenna Specifications SpecificationsComputer Requirements FCC Requirements Note Ptcrb Requirements NoteLoad Balancing MVPGSM-2 model content list Installation and ActivationSafety Warnings Unpacking Your MultiVOIP GSMDimensions for Mounting Mounting InstructionsCabling Procedure Cabling for MVPGSM-2Check Signal Strength Activate Your Wireless AccountInstalling the SIM Cards GSM InstructionsLoading MultiVOIP GSM Software onto the PC Software InstallationMvpgsm splash screen Installation wizard screen Destination screenConfiguration screen Completion screenSetup Overview Main ScreenEthernet/IP IP settingsActions Voice settings VoiceActions Wireless Interface Wireless Interface ParametersImportant Verify Signal Strength Call Signaling SIP parametersRegional Regional ParametersPhone Book Inbound and Outbound directions Phone Book screensSave & Reboot Configuring Your MultiVOIP GSM Software Categories Covered in This ChapterHow to Navigate Through the Software Web Browser InterfaceNetwork parameters Field Name Values Ethernet Parameters Ethernet/IP Parameter DefinitionsDescription IP Parameter fieldsFields Field Name Values Description Diff ServParameter FTP Parameter fieldsVoice/Fax Voice/Fax parametersField Name Values Voice/Fax Parameter DefinitionsDtmf Parameters Net Coder @ Advanced FeaturesCoder Parameters 711, G.729Dynamic Jitter Field Name Values AutoCall/Offhook Alert ParametersAuto Disconnect Configurable Payload Type Wireless parametersWireless Interface parameter definitions Field Name Values DescriptionSIP call signaling SIPSIP Call Signaling Parameter Definitions PasswordRegional Regional Parameter Definitions Default -16dBStandard Tones fields Custom Tone-Pair Settings Definitions Tone Pair ValuesEmail Address for Voip for email call log reporting Smtp parametersSmtp Parameters Definitions Mail CriteriaFrom Details Custom Fields DefinitionsField Description To DetailsRadius settings RadiusRetransmissions field Radius Screen Field DefinitionsFrom Details To Details Logs/Traces Logs and Filters screensLogs Screen Definitions NAT Traversal Definitions Field Name Values Enable StunNAT Traversal NAT TraversalSupplementary Services Supplementary ServicesSupplementary Services Parameter Definitions Settings Save SettingsSave & Reboot COM port setupFixing a Cabling Problem Troubleshooting Software IssuesFixing a COM Port Problem Error pop-upPhone Book Configuration Sample Configurations General NotesAnalog Voip and Mvpgsm Example Inbound Phone BooksLoad Balancing Example Outbound Phone Books Outbound Phone Book/List Entries Phone Book DescriptionsOutbound Phone Book Add/Edit Outbound Phone Book Add/Edit screenAdd/Edit Outbound Phone Book Field Definitions SIP FieldsAlternate Routing Field Definitions Advanced buttonInbound Phone Book/List Entries Inbound phonebook entriesAdd/Edit Inbound Phone Book Add/Edit Inbound Phone BookAdd/Edit Inbound Phone Book Field Definitions Call Forward ParametersPhone Book Save and Reboot Authorized User Name and Password for SIPUsing the Software System Information Parameter Definitions System information screenCall Progress Statistics SectionCall progress screen Packet Details Call Progress Details Field DefinitionsCall Details From To DetailsCall Status Fields Field Name Values Supplementary Services StatusDisconnect button Description Logs Log statistics screenLogs Screen Details Field Definitions Supplementary Services InfoSpecial Buttons IP Statistics IP statistics screenIP Statistics Field Definitions Link management Link ManagementLink Management screen Field Definitions Field Name Values Monitor Link fieldsSIP Proxies Statistics, Servers Field Definitions ServersSIP Proxies SIP proxiesPacketization Ranges and Increments Recommendations AdvancedPacketization Time Packetization timeMultiVOIP GSM Program Menu MultiVOIP GSM Program Menu ItemsMenu Selection Confirmation screen Setting and Downloading User DefaultsSave & Reboot Progress barsPassword screen Setting a PasswordWindows Interface Web interface password change Password verificationInvalid password Web Browser InterfaceUpgrade software path Upgrading SoftwareChange password FTP Server File Transfers DownloadsEnable FTP server File Type File Names DescriptionFTP address Download with FTP Client Program MultiVOIP GSM Web Browser Interface Overview Web interface mainJava install screen Browser choice Enable SysLog SysLog Server FunctionsAppendix a Cable Pin-outs & Ports RJ-45 ConnectorRJ-45 Ethernet Connector Pin Circuit Signal Name Function Port NumberEMC, Safety, and R&TTE Directive Compliance Appendix B Regulatory InformationIndustry Canada July Appendix D C-ROHS HT/TS Substance Concentration 依照中国标准的有毒有害物质信息Index

MVPGSM-2 specifications

The Multi-Tech Systems MVPGSM-2 is a robust and versatile device designed for various telecommunication applications, particularly those involving GSM cellular technology. This multi-function modem is ideally suited for machine-to-machine (M2M) communication, enabling seamless data transfer for remote monitoring, control, and automation.

One of the MVPGSM-2's key features is its dual-band GSM support, which allows for enhanced connectivity and coverage. The device operates on both 850 MHz and 1900 MHz frequency bands, ensuring compatibility with a wide range of GSM networks across different geographical areas. This flexibility makes it an excellent choice for applications that require reliable wireless communication, such as in remote sensors, telemetry, and industrial automation.

The MVPGSM-2 incorporates advanced technologies like GPRS (General Packet Radio Service) and SMS (Short Message Service), enabling efficient and real-time communication capabilities. GPRS facilitates data transmission at speeds up to 114 kbps, making it suitable for sending and receiving large volumes of data quickly. The SMS functionality allows for reliable and immediate messaging, making it easier to receive alerts and notifications in real time.

One of the standout characteristics of the MVPGSM-2 is its rugged design. Built to withstand harsh environmental conditions, it features durable casing that protects it from dust and moisture. This ruggedness ensures that the device performs reliably in various industries, including agriculture, transportation, and energy, where exposure to challenging conditions is common.

Additionally, the MVPGSM-2 supports multiple I/O ports, including digital inputs and outputs, which provide flexibility in integration with various sensors and control systems. This versatility allows users to customize the device to meet specific application needs.

The device also comes with comprehensive software and development kits that streamline integration into existing systems and applications. Multi-Tech Systems offers extensive technical support and documentation, ensuring that users can easily navigate the setup process.

In summary, the Multi-Tech MVPGSM-2 is a powerful GSM modem designed for M2M communication, featuring dual-band support, GPRS and SMS capabilities, rugged design, and flexible I/O options. Its robust performance makes it a valuable tool for various industrial applications, ensuring reliable data communication and management in the field.
Top Page Image Contents