Chapter 3: Software Installation
6.On the next screen you can select the COM port that the command PC will use when communicating with the MultiVOIP GSM unit. After software installation, the COM port can be
Note: If the COM port setting made here conflicts with the actual COM port resources available in the command PC, the “Error in Opencomm handle” message will appear when the MultiVOIP GSM program is launched. If this occurs, you must reset the COM port.
7.A completion screen will appear.
Completion screen
Click Finish.
8.When setup of the MultiVOIP GSM software is complete, you will be prompted to run the MultiVOIP GSM software to configure the VOIP.
Configuration screen
Software installation is now complete.
MVPGSM | 13 |