Multi-Tech Systems MVPGSM-2 Call Progress Details Field Definitions, Call Details, Packet Details

Chapter 6: Using the Software

Call Progress Details: Field Definitions

Field Name	Values
Channel	1-n
Call Details
Duration	H/M/S
Mode	Voice or FAX
Voice Coder	G.723, G.729,
	G.711, etc.
IP Call Type	SIP
IP Call Direction	incoming,
	outgoing
Packet Details
Packets Sent	integer value
Packets Rcvd	integer value
Bytes Sent	integer value
Bytes Rcvd	integer value
Packets Lost	integer value
From – To	Details
Gateway Name	alphanumeric
(from)	string
IP Address (from)	n.n.n.n
Options	SC, FEC
Gateway Name (to)	alphanumeric
IP Address (to)	n.n.n.n
Options	SC, FEC
DTMF/Other Details
Prefix Matched	specified
	dialing digits
Outbound Digits Sent	0-9, #, *
Outbound Digits	0-9, #, *
Received
Server Details	n.n.n.n
	and/or other
	related
	descriptions
DTMF Capability	inband,
	out of band
	Expressions
	differ slightly
	for different
	Call Signaling
	protocols.

Description

This is the channel for which call-progress details are being viewed.

The length of the call in hours, minutes, and seconds (hh:mm:ss). Indicates whether the call being described was a voice call or a FAX call. The voice coder being used on this call.

Indicates the Call Signaling protocol used for the call (SIP).

Indicates whether the call in question is an incoming call or an outgoing call.

Number of voice packets sent over IP network in the course of this call. Number of voice packets received over IP network during this call. Number of bytes sent over IP network in the course of this call. Number of bytes received over IP network in the course of this call. Number of voice packets lost in the course of this call.

Description

Identifier for the SIP end point gateway that originated the call.

IP address for the SIP end point that originated the call.

Displays VOIP transmission options in use on the current call. These may include Forward Error Correction or Silence Compression.

Identifier for the VOIP gateway that received the call. IP address for the VOIP gateway that received the call. Displays VOIP transmission options in use on the current call

Displays the dialed digits that were matched to a phonebook entry.

The digits transmitted by the MultiVOIP GSM for this call.

Of the digits transmitted by the MultiVOIP GSM for this call; these are the digits that were confirmed as being received.

The IP address (etc.) of the traffic control server (if any) being used (SIP proxy) will be displayed here if the call is handled through that server.

Indicates whether the DTMF dialing digits are carried "Inband" or "Out of Band."

For SIP it can display either "Out of Band RFC2833" or "Out of Band SIP INFO" to indicate the out-of-band condition or "Inband" to indicate the in-band condition.

Table is continued on next page…

Multi-Tech Systems, Inc. MVPGSM 67