Multi-Tech Systems MVPGSM-2 manual Logs Screen Details Field Definitions, Special Buttons

Chapter 6: Using the Software

Logs Screen Details: Field Definitions

Field Name		Values
Log # column		1 or higher
Start Date, Time		dd:mm:yyyy
column		hh:mm:ss
Duration column		hh:mm:ss
Type		SIP
Status column		success or failure
IP Direction		Incoming,
		outgoing
Mode column		voice or FAX
From column		gateway name
To column		gateway name
Special	Buttons
Previous			--
Next			--
First			--
Last			--
Delete File			--
Call Details
Voice coder			Coder protocol
Disconnect Reason			"Normal" or
			"Local"
DTMF Capability			inband,
			out of band
Outbound Digits			0-9, #, *
Received
Outbound Digits Sent			0-9, #, *
Server Details			n.n.n.n
Packets sent			integer value
Packets received			integer value
Packets lost			integer value
Bytes sent			integer value
Bytes received			integer value
FROM Details
Gateway Name			alphanumeric
IP Address			n.n.n.n
Options			FEC, SC
TO Details
Gateway Name			alphanumeric
IP Address			n.n.n.n
Options
Supplementary			Services Info
Call Transferred To			phone number
Call Forwarded To			phone number

Description

All calls are assigned an event number in chronological order, with the most recent call having the highest event number.

The starting time of the call. The date is presented as a day and a month of one or two digits, and a four-digit year, followed by a time-of-day. This describes how long the call lasted in hours, minutes, and seconds. Indicates the Call Signaling protocol used for the call (SIP).

Displays the status of the call (whether the call was completed or not). Shows call "incoming" or "outgoing" with respect to the gateway.

Shows if the event being described was a voice call or a FAX call. Displays the name of the voice gateway that originates the call. Displays the name of the voice gateway that completes the call.

Displays log entry before currently selected one.

Displays log entry after currently selected one.

Displays first log entry

Displays last log entry.

Deletes selected log file.

The voice coder being used on this call.

Indicates whether the call was disconnected simply because the desired conversation was done or some other irregular cause.

Indicates whether the DTMF dialing digits are carried "Inband" or "Out of Band." The corresponding field values differ for the 3 different VOIP protocols. For SIP it can display either "Out of Band RFC2833" or "Out of Band SIP INFO" to indicate the out-of-band condition or "Inband" to indicate the in-band condition.

These are the digits received from the remote SIP end point that are used to initiate a call out on the wireless network.

These are the digits received from the wireless network and sent to the remote SIP end point to place a call.

When the MultiVOIP GSM is operating in the non-direct mode (with proxy in SIP mode), this field shows the IP address of the server that is directing IP phone traffic.

Number of voice packets sent over the IP network during this call. Number of voice packets received over the IP network in the course of this call.

Number of voice packets from this call that were lost after being received from the IP network.

Number of bytes of voice sent over the IP network during this call. Number of bytes of voice received over the IP network during this call.

Identifier for the VOIP gateway that originated this call. IP address for the VOIP gateway that originated this call.

Displays transmission options used by the gateway originating the call.

Identifier for the VOIP gateway that received this call. IP address for the VOIP gateway that received this call.

Displays transmission options used by VOIP gateway receiving the call.

Number of party called in transfer.

Number of party called in forwarding.

Multi-Tech Systems, Inc. MVPGSM 70