Multi-Tech Systems MVPGSM-2 manual Computer Requirements, Antenna Specifications

Page 5

Chapter 1: Description & Specifications

Computer Requirements

The computer on which the MVPGSM configuration program is installed must meet these requirements:

must be IBM-compatible PC with MS Windows operating system;

must have an available COM port for connection to the MultiVOIP GSM.

However, this PC does not need to be connected to the MultiVOIP GSM permanently. It only needs to be connected when local configuration and monitoring are done. Nearly all configuration and monitoring functions can be done remotely via the IP network using a web browser.

Specifications

 

MVPGSM-2

 

+9 to 12Vdc

Operating Voltage/Current

(9Vdc @ 750mA)

 

(12Vdc @ 580mA)

Mains Frequencies

50 - 60 Hz

Power Consumption

14 watts

 

1.71” H x (2.1” with feet attached)

 

9.792” W x

 

7.646” D

Mechanical Dimensions

----------------

 

4.343 cm H x (5.334 cm with feet attached)

 

24.871 cm W x

 

19.42 cm D

Weight

4.75 lbs (2.14 kg)

Operational Temperature

-5° to +55° C (UL listed @ 40° C limited by power supply)

@ 20-90% non-condensing relative humidity.

 

 

CE

Certifications

EMC: FCC Parts 2/15/22/24, RSS 132/133, EN 310 489-7, EN 55022,

EN 55024

 

 

Safety: UL 60950, cUL, EN 60950, AS/NZS 60950:2000

 

 

Antenna Specifications

GSM/EGSM Antenna Requirements/Specifications

Frequency Range:

824 – 960 MHz / 1710 – 1990 MHz

Impedance:

50 Ohms

VSWR:

<2.0:1

Typical Radiated Gain:

3 dBi on azimuth plane

Radiation:

Omni

Polarization:

Vertical

Wave:

Half Wave Dipole

Antennas available from Multi-Tech Systems, Inc.

Description

900/1800 MHz 1/2 Wave Antenna Mag Mount, 12.5", 1 Pack

850/1900 MHz 1/2 Wave Antenna Mag Mount, 12.5", 1 Pack

Part Number

ANF1-1MMHW ANF2-1MMHW

Multi-Tech Systems, Inc.

MVPGSM

5

Image 5
Contents MultiVOIP GSM S000450A WarrantyCopyright 2008, by Multi-Tech Systems, Inc Revision Date DescriptionContents Introduction Description and SpecificationsFront Panel LEDs Front Panel LED Definitions DescriptionComputer Requirements SpecificationsAntenna Specifications Load Balancing Ptcrb Requirements NoteFCC Requirements Note Safety Warnings Installation and ActivationMVPGSM-2 model content list Unpacking Your MultiVOIP GSMMounting Instructions Dimensions for MountingCabling for MVPGSM-2 Cabling ProcedureInstalling the SIM Cards Activate Your Wireless AccountCheck Signal Strength GSM InstructionsMvpgsm splash screen Software InstallationLoading MultiVOIP GSM Software onto the PC Destination screen Installation wizard screenCompletion screen Configuration screenMain Screen Setup OverviewActions IP settingsEthernet/IP Voice Voice settingsActions Wireless Interface Parameters Wireless InterfaceImportant Verify Signal Strength SIP parameters Call SignalingRegional Parameters RegionalInbound and Outbound directions Phone Book screens Phone BookSave & Reboot Software Categories Covered in This Chapter Configuring Your MultiVOIP GSMWeb Browser Interface How to Navigate Through the SoftwareNetwork parameters Description Ethernet/IP Parameter DefinitionsField Name Values Ethernet Parameters IP Parameter fieldsParameter Field Name Values Description Diff ServFields FTP Parameter fieldsVoice/Fax parameters Voice/FaxDtmf Parameters Voice/Fax Parameter DefinitionsField Name Values Coder Parameters Advanced FeaturesNet Coder @ 711, G.729Auto Disconnect Field Name Values AutoCall/Offhook Alert ParametersDynamic Jitter Wireless parameters Configurable Payload TypeField Name Values Description Wireless Interface parameter definitionsSIP SIP call signalingPassword SIP Call Signaling Parameter DefinitionsRegional Standard Tones fields Default -16dBRegional Parameter Definitions Tone Pair Values Custom Tone-Pair Settings DefinitionsSmtp parameters Email Address for Voip for email call log reportingMail Criteria Smtp Parameters DefinitionsField Description Custom Fields DefinitionsFrom Details To DetailsRadius Radius settingsFrom Details To Details Radius Screen Field DefinitionsRetransmissions field Logs and Filters screens Logs/TracesLogs Screen Definitions NAT Traversal Field Name Values Enable StunNAT Traversal Definitions NAT TraversalSupplementary Services Supplementary ServicesSupplementary Services Parameter Definitions Save & Reboot Save SettingsSettings COM port setupFixing a COM Port Problem Troubleshooting Software IssuesFixing a Cabling Problem Error pop-upPhone Book Configuration General Notes Sample ConfigurationsLoad Balancing Example Inbound Phone BooksAnalog Voip and Mvpgsm Example Outbound Phone Books Outbound Phone Book Phone Book DescriptionsOutbound Phone Book/List Entries Add/Edit screen Add/Edit Outbound Phone BookSIP Fields Add/Edit Outbound Phone Book Field DefinitionsAdvanced button Alternate Routing Field DefinitionsInbound phonebook entries Inbound Phone Book/List EntriesAdd/Edit Inbound Phone Book Add/Edit Inbound Phone BookCall Forward Parameters Add/Edit Inbound Phone Book Field DefinitionsAuthorized User Name and Password for SIP Phone Book Save and RebootUsing the Software System information screen System Information Parameter DefinitionsCall progress screen Statistics SectionCall Progress Call Details Call Progress Details Field DefinitionsPacket Details From To DetailsDisconnect button Description Field Name Values Supplementary Services StatusCall Status Fields Log statistics screen LogsSpecial Buttons Supplementary Services InfoLogs Screen Details Field Definitions IP statistics screen IP StatisticsIP Statistics Field Definitions Link Management screen Field Definitions Link ManagementLink management Field Name Values Monitor Link fieldsSIP Proxies ServersSIP Proxies Statistics, Servers Field Definitions SIP proxiesPacketization Time AdvancedPacketization Ranges and Increments Recommendations Packetization timeMenu Selection MultiVOIP GSM Program Menu ItemsMultiVOIP GSM Program Menu Save & Reboot Setting and Downloading User DefaultsConfirmation screen Progress barsWindows Interface Setting a PasswordPassword screen Invalid password Password verificationWeb interface password change Web Browser InterfaceUpgrading Software Upgrade software pathFTP Server File Transfers Downloads Change passwordFile Type File Names Description Enable FTP serverFTP address Download with FTP Client Program Web interface main MultiVOIP GSM Web Browser Interface OverviewJava install screen Browser choice SysLog Server Functions Enable SysLogRJ-45 Ethernet Connector Pin Circuit Signal Name RJ-45 ConnectorAppendix a Cable Pin-outs & Ports Function Port NumberAppendix B Regulatory Information EMC, Safety, and R&TTE Directive ComplianceIndustry Canada July 依照中国标准的有毒有害物质信息 Appendix D C-ROHS HT/TS Substance ConcentrationIndex

MVPGSM-2 specifications

The Multi-Tech Systems MVPGSM-2 is a robust and versatile device designed for various telecommunication applications, particularly those involving GSM cellular technology. This multi-function modem is ideally suited for machine-to-machine (M2M) communication, enabling seamless data transfer for remote monitoring, control, and automation.

One of the MVPGSM-2's key features is its dual-band GSM support, which allows for enhanced connectivity and coverage. The device operates on both 850 MHz and 1900 MHz frequency bands, ensuring compatibility with a wide range of GSM networks across different geographical areas. This flexibility makes it an excellent choice for applications that require reliable wireless communication, such as in remote sensors, telemetry, and industrial automation.

The MVPGSM-2 incorporates advanced technologies like GPRS (General Packet Radio Service) and SMS (Short Message Service), enabling efficient and real-time communication capabilities. GPRS facilitates data transmission at speeds up to 114 kbps, making it suitable for sending and receiving large volumes of data quickly. The SMS functionality allows for reliable and immediate messaging, making it easier to receive alerts and notifications in real time.

One of the standout characteristics of the MVPGSM-2 is its rugged design. Built to withstand harsh environmental conditions, it features durable casing that protects it from dust and moisture. This ruggedness ensures that the device performs reliably in various industries, including agriculture, transportation, and energy, where exposure to challenging conditions is common.

Additionally, the MVPGSM-2 supports multiple I/O ports, including digital inputs and outputs, which provide flexibility in integration with various sensors and control systems. This versatility allows users to customize the device to meet specific application needs.

The device also comes with comprehensive software and development kits that streamline integration into existing systems and applications. Multi-Tech Systems offers extensive technical support and documentation, ensuring that users can easily navigate the setup process.

In summary, the Multi-Tech MVPGSM-2 is a powerful GSM modem designed for M2M communication, featuring dual-band support, GPRS and SMS capabilities, rugged design, and flexible I/O options. Its robust performance makes it a valuable tool for various industrial applications, ensuring reliable data communication and management in the field.