Chapter 4: Configuring your MVPGSM
How to Navigate Through the Software
The MultiVOIP GSM software is launched from the Start button and is found in the All Programs area under the title of MultiVOIP GSM x.xx (where x represents version number). The top option is “Configuration” – choose this.
Within the software, there are several ways to arrive at the parameter that you want to use: through the left- hand panel, from the
Web Browser Interface
The MultiVOIP GSM web browser interface gives access to the same commands and configuration parameters as are available in the MultiVOIP GSM Windows interface except for logging functions. When using the web browser interface, logging can be done by email (the SMTP option).
Set up the Web Browser interface (Optional). After an IP address for the MultiVOIP GSM unit has been established, you can choose to configure the unit by using the MultiVOIP GSM web browser interface. If you want to do configuration work using the web browser interface, you must first set it up:
•Set IP address of MultiVOIP GSM unit using the MultiVOIP GSM Configuration program (the Windows interface). The default IP address is 192.168.3.143.
•Save Setup in Windows interface.
•Close Windows interface.
•Install Java program from MultiVOIP GSM product CD (on first use only).
•Open web browser.
•Browse to IP address of MultiVOIP GSM unit.
•If a username and password have been set up, enter them when prompted.
•Set the browser to allow
•The configuration screens in the web browser will have the same content as their counterparts in the software; only the presentation differs.
MVPGSM | 25 |