Chapter 3—Software/Driver Installation
Installing ISI460x-PCI Software for Windows 2000
NOTE: A series of ‘installation wizard’ screens will appear repeatedly during this procedure (step 12). This is not an error. Do not discontinue the procedure when the ‘installation wizard’ screens repeatedly appear.
1.Shut down Windows 2000 and turn off the PC.
2.Install the ISI460x-PCI card in an available PCI expansion slot in the computer. Follow the computer manufacturer's instructions concerning installation of expansion cards. Observe standard precautions regarding electro-static discharge (ESD) when handling the ISI460x-PCI board (the board should be kept in its shipping bag until used). During installation, handle the ISI460x- PCI circuit card by its edges and keep one hand in contact with the PC chassis.
3.Turn on the PC and start Windows 2000.
4.Insert the ISI driver CD-ROM into the CD-ROM drive (if drivers have been downloaded from the MultiTech web site, they will typically be on diskette; in that case, insert diskette into floppy drive).