Chapter 3—Software/Driver Installation
Printer base name selected: _________________
When you have specified the device base name and the printer base name, press ENTER to continue.
4.The confirmation screen lists the values you have selected. The following text appears on the screen (default values are shown):
You have chosen the following setup The tty prefix is ttyl.
The printer prefix is prnl.
Number of Multi_View pseudo devices
If these values are correct, type Y and the installation process will continue. If there is an error in any of the values displayed, type N and the first screen displays. Then
When you accept the confirmation list (by typing Y), a series of messages displays while the driver is being installed and the kernel rebuilt. After the terminals have been added to the Terminal Control database, and when the display says “Press <Enter> to continue:”, then press ENTER. When Installation complete displays, press ENTER again.
5.Select Host and press ENTER . Remove the diskette from the drive.
6.Select Exit and press ENTER .
7.To reboot the system (required), enter the following commands:
Type shutdown
OR
Type init 6 and press ENTER . Driver installation for the ISIHP card now is complete.
43