Chapter 3—Software/Driver Installation
To view busy I/O address space on your system, enter:
cat /proc/ioports
To view busy IRQs, enter:
cat /proc/interrupts
To load the driver manually, use insmod.
Example: To load two ISI cards configured with base I/O addresses 0x210 and 0x200 and IRQs 5 and 10, enter the following in the destination folder:
insmod isicom ISIBase1=0x210 Irq1=5 ISIBase2=0x200 Irq2=10
To remove the driver manually, enter rmmod isicom. This removes the driver only if no ISI ports are in use.
Removing the ISI Driver (Linux)
1.Type cd /usr/local. Press ENTER.
2.Type rm
3.This will remove driver for all
4.Remove the isictl file by typing “rm isictl” in the /dev directory.
5.Remove all devices that start with ttyM1x, ttyM2x, ttyM3x and ttyM4x in the /dev directory.
“rm ttyM1*”
“rm ttyM2*”
“rm ttyM3*”
“rm ttyM4*”
51