Multi-Tech Systems ISI4608-PCI manual Copy E\SERVCARD\DRIVERS\NOVELL\AIOSIX.NLM F\SYSTEM

ISI4608-PCI User Guide

The file AIOMTS.MDC contains Novell (version 3.12 and higher) initialization strings for ISI products not previously listed for use with BorderManager and Netware Connect. The file AIOMTS.MDC is included on the ISI Product Family CD. To benefit from the AIOMTS.MDC file, you must copy it from the CD to the appropriate directory on your computer.

To use AIOMTS.MDC under Border Manager, RAS, NIAS in 4.2 or 5.x:

Copy AIOMTS.MDC to your System directory.

To use AIOMTS.MDC under Novell NetWare 3.x, 4.1, 4.11 with NetWare Connect 2.0.28 or higher:

Copy AIOMTS.MDC to your System and System/AIO directory.

To install the Multi-Tech AIO driver, copy the file AIOISIX.NLM to the system directory of the file server from a workstation on the network. To copy, you can use the following command:

COPY E:\SERVCARD\DRIVERS\NOVELL\AIOSIX.NLM F:\SYSTEM

If you have downloaded the ISI driver from the MultiTech web site onto a diskette, use this command:

COPYA:\NOVELL\AIOISIX.NLM F:\SYSTEM

To load the driver, go to the system or PC console (where the ISI card is installed) and enter the following at the prompt:

LOAD AIOISIX [port=W] [interrupt=X] [name=Y] [note=Z]

For the ISI460x-PCI cards, which are PCI-bus equipped, Netware will set up the interrupt (IRQ) and I/O address automatically.

To install the ISI card scripts, copy aiomdms.mdc to

36