Chapter 3—Software/Driver Installation
-Select Create.
-Press space bar to highlight tmp/ and usr/ directories.
-Press ENTER to copy.
-Make sure Device is pointed to the floppy disk.
-Make sure that the “Type” is cpio.
-Select Continue.
5.To verify that the files have been copied onto the floppy disk, use these commands:
# scosh
-Select Manager.
-Select Archive.
-Select List.
-Make sure Device is pointed to the floppy disk.
-Select Continue.
To install driver from floppy disk
(Users starting with the untarred SCO5 driver on a floppy disk can begin the installation here).
1.Run the custom utility.
2.Select Software.
3.Select Install New.
4 Highlight driver file from local host and select Continue. 5. Select as the Media Device “Floppy Disk Drive.”
6. Select | . |
7.Highlight
8.Enter Y (yes) to continue installing the ISI driver.
39