Multi-Tech Systems ISI4608-PCI manual MultiTech Installation Script

ISI4608-PCI User Guide

9.As many as four ISI cards can be installed in the server. Type 0. Because the ISI460x-PCI card has a PCI bus, SCO can detect how many ISI cards are present. (For ISA-bus cards, the number of cards, 1, 2, 3, or 4, must be specified overtly.)

For further details see MultiTech Installation Script step 1.

10.Type the number of pseudo-devices to be created. For the ISI4604-PCI, type 4.

For the ISI4608-PCI, type 8.

For further details see MultiTech Installation Script step 2.

11.Type Y (yes) to accept the prefix for tty ports. For further details see MultiTech Installation Script step 3.

12.Type Y (yes) to confirm the selection. For further details see MultiTech Installation Script step 4.

13.After the driver is installed, press ENTER to continue. For further details see MultiTech Installation Script step 4(last paragraph) and step 5.

14.Exit the custom utility. For further details see MultiTech Installation Script step 6.

15.Remove the floppy disk and reboot your computer. For further details see MultiTech Installation Script step 7.

MultiTech Installation Script

The Multi-Tech Installation Script for SCO Open Server 5 systems requests information about how many boards you want to install, designations for communication ports and printer ports, and how many pseudo devices you want to create for Multi_View utility. Based on this information, the appropriate driver files will be installed and linked with your system’s kernel.

1. This text appears on the screen:

You can install up to 4 ISA/PCI cards in a system. The PCI cards will be autodetected on bootup. Enter the number of ISA cards you want to install and configure on your system

40