Hitachi DZMV350A instruction manual When using brand-new DVD-R disc, When recording data from PC

Note:

•Disc cannot be inserted or removed unless the battery or AC adapter/charger is connected to DVD video camera/ recorder.

•See page 76 for how to set disc in Round DVD Holder.

•If there is some delay before recording starts, refer to page 147.

•The disc insertion orientation is predetermined: Forcibly inserting a disc in wrong orientation could damage the DVD video camera/recorder or Round DVD Holder of disc.

•If the disc is not inserted correctly the cover will not close. If the cover will not close, remove the disc and then reinsert it.

•If a single-sided disc is inserted into DVD video camera/ recorder with the printed label facing the inside, an error message will appear. Remove the disc and reinsert it with its recording/playback side facing the inside. See “Trouble Messages” on page 149.

●When using brand-new DVD-R disc

Recognition of the disc will
	F o r ma t	D i s c
start.
The messages on the right	D i s c i s n o t f o r m a t t e d .
	I f i t f o r m a t s , i t b e c o m e s
will appear in sequence by
	p o s s i b l e t o u s e f o r c a m e r a .
pressing the ￿ button	NEXT	CANCEL
between messages.

When recording on this

DVD video camera/

recorder:	F o rma t	D i s c
When final message	Howeve r ,		when you r e c o r d
“Format the disc now?”	f r om PC connec t i on
	t e r m i n a l ,
appears, choose “YES” and	p l e a s e d o n o t format.
then press the ￿ button.	NEXT	CANCEL
The disc will be
automatically formatted.
When formatting is
complete, “DVD-R disc,
	F o r ma t	D i s c
Video mode cannot be
changed” will appear (See	F o r m a t		t h e d i s c n o w ?
page 152): Press the ￿
		YES		NO
button to erase the message.	ENTER
Once formatted, a DVD-R
disc can no longer be

changed to a disc for PC, even if it has not been recorded on this DVD video camera/recorder.

Note:

See page 86 for movie quality mode.

When recording data from PC:

While the above messages are being displayed, press the ￿button, or when message “Format the disc now?” appears, choose “NO” and then press the ￿ button.

However, if data from PC has not yet been recorded, the disc can be made usable on this DVD video camera/recorder. When inserting the disc into this DVD video camera/recorder, the same message will appear: If you wish to use it on this DVD video camera/recorder, choose “YES”.

Note:

Do not initialize a disc on which you wish to record data created using the application (MyDVD) of PC.

English

42