Hitachi DZMV350A instruction manual 159, When the DVD video camera/recorder is connected to PC

When the DVD video camera/recorder is connected to PC:

Symptom	Cause and Correction	Reference
		page
No drive icon appears on	The DVD video camera/recorder is not turned on.	45
PC.	Check the power supply.
	Driver is not properly recognized.
	Turn PC off and on again. If the drive icon still does not appear, use	
	“Refresh driver” in Device Manager to reinstall the driver.
	Turn PC off and then disconnect the PC connection cable. Turn PC
	on again, and then use the PC connection cable to connect the DVD	
	video camera/recorder to PC.
	Make sure the PC connection cable is completely plugged into this	
	DVD video camera/recorder.
	If a yellow “!” mark is attached to some device in Windows ®Device
	Manager, uninstall the USB device driver, and then reinstall it,	
	following the procedure on page 135.
A fatal exception 0A error	It is recommended that you install Windows®2000 Service Pack 3
occurs while installing	or later.	
USB driver in Windows®
2000 Professional.
Error occurs in playback	If error occurs with USB connection, the transfer rate is not sufficient.
of DVD video camera/	It is recommended that you use a USB terminal conforming to	
recorder on PC.	USB2.0 when connecting the DVD video camera/recorder.
Application is not	Turn the PC and DVD video camera/recorder off, and try again.	
normally run on PC.
Some vibrations are felt	These vibrations or sound are caused by disc drive: This does not
or slight sound is heard	indicate a fault.	
from mechanism.
Error occurs during	The temperature of DVD video camera/recorder is too high due to
writing to DVD-R disc.	continuous operation.
	Disconnect the DVD video camera/recorder from PC once, remove	
	the disc from the DVD video camera/recorder, and then turn it off.
	After a few moments, connect them again and write to a brand-new
	disc.
Transfer of images stops.	Connect the DVD video camera/recorder to another USB terminal
	of PC. If your PC is a desktop type, it is recommended that you use
	USB terminal on the back of PC. If you are using USB2.0 extended	
	card, it is also recommended that you install the newest version
	driver provided by each USB2.0 card maker.
DVD-RAM/R/RW drive	This problem may be solved if the software related to DVD-RAM/R/
built into PC cannot be	RW of your PC is upgraded, or if the UDF driver is uninstalled.
			English
installed.	the JPEG stills recorded on DVD-RAM of this DVD video camera/
used after the provided	However, with Windows® 98 Second Edition / Me / 2000	
software has been	Professional, uninstalling the UDF driver will make it impossible for
	recorder to be read by the PC.
DVD-R disc cannot be	DVD-MovieAlbumSE does not support playback or data read on
played back on DVD-	DVD-R disc: Use generally available DVD video playback software	139
MovieAlbumSE.	to play back DVD-R disc on PC.
Error appears when	Make sure that your PC display adapter (video card) conforms to
starting DVD-	DirectX8.1.	
MovieAlbumSE.

159