Hitachi DZMV350A Using the Electronic Image Stabilizer EIS, Checking EIS On or Off

USING THE ELECTRONIC IMAGE STABILIZER (EIS)

This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.

1 Press the MENU button, choose “EIS” on the “Camera Functions Setup” menu screen, and then press the ￿ button.

Came r a		F u nc t i on s	Se t u p
	P r og r am AE
	Wh i t e Ba l .
	E I S			On
	D i g . Zoom			Of f
	M IC . F i l t e r
ENTER		RETURN			RAM

●Checking EIS On or Off

You can check EIS On or Off by the on-screen information display.

	0 : 0 0 : 0 0
EIS	REM3 0 MIN

2 Choose the “On” or “Off”, and then press the

￿button.

3 Press the MENU button to end the setting.

FINE	8 : 0 0 AM
	9 / 3 0 / 2 0 0 3

After recording with EIS set to “Off”, it is recommended that you return the setting to “On” and then turn the DVD video camera/recorder off, unless you normally record with “Off” setting. This function is effective only during movie recording: It will not work during still recording.

Note:

•The EIS setting will be stored in memory even when the DVD video camera/recorder is turned off.

•Although you can switch EIS between on and off during still recording, the setting will be effective only during movie recording.

•It is recommended that you specify “EIS Off” when using the DVD video camera/recorder on a desk or tripod.

•When “EIS On” is specified, there will be a slight difference between the actual movement and the movement on screen.

•Gross camera shake may not be entirely corrected even if “EIS On” is specified.

•EIS may not operate correctly when the tele or wide- conversion lens (generally available) is used.

English

83