Hitachi DZMV350A instruction manual 111, Designating Scenes to be Printed Dpof

￿

DESIGNATING SCENES TO BE PRINTED (DPOF)

You can use DPOF to set print information, including selection of the scenes to be printed, so that you will be able to use it on a system conforming to DPOF.

Note:

DPOF stands for digital print order format. DPOF is used to ask a print lab to print recorded stills.

1 Set the power switch to “￿ PHOTO”.
2 Press the DISC NAVIGATION button.
3 Select the scene to which DPOF is to be set.
4 Press the MENU button.
5 Choose “DPOF” on the	Sc e n e
“Scene” menu screen,
	De l e t e
and then press the ￿	L o c k
	DPOF
button.
	Se l e c t
	De t a i l
6 The “DPOF Set” screen	ENTER RETURN
will appear: If you are
sure you want to set DPOF to the scene, press the

￿button.

DPOF Set 7 / 19

6

ENTER EXIT DPOF icon

If you want to change the scene to which DPOF is set, you can change it on this screen.

7 Use joystick to specify the	DPOF Set	7 / 19
number of prints, and
then press the ￿
button:		3

Tilt it up or to right: To	ENTER EX I T
increase the number one

by one.

Tilt it down or to left: To decrease the number one by one.

After setting, the “DPOF Set” screen will be restored.

Repeat steps 6 and 7 to set DPOF to another still.

8 Press the ￿ button to quit.

Note:

•If you press the MENU button before pressing the ￿ button in step 6, the submenu screen will appear. (P.102)

•You can also select multiple photos (P.98).

•If you specify the number after selecting multiple stills, the same specified number will be set to all those stills.

•Up to 99 prints can be set for one scene. The maximum number of settable prints on one card is 999.

•This DVD video camera/recorder may not recognize DPOF that has been set on another device: Always set the DPOF on this DVD video camera/recorder.

English

111