Note:

The white balance set using the “Set” option will be stored in memory until it is reset.

Do not use a colored object when setting the white balance: The appropriate tint cannot be set.

Do not block the infrared sensor with hand, etc.

Infrared sensor block

If a generally available tele or wide-conversion lens is used, the auto white balance may not operate depending on the recording conditions. If this happens, set to the mode to match the recording conditions, or manually set the white balance.

Be sure to remove the lens cap before turning the DVD video camera/recorder on: If the DVD video camera/ recorder is turned on with the lens capped, the white balance will not work normally.

English

82

Page 82
Image 82
Hitachi DZMV350A instruction manual English