Hitachi DZMV350A instruction manual Playing Back, Immediately Checking Recorded Scene

Playing Back

￿￿￿

IMMEDIATELY CHECKING RECORDED SCENE

You can check your recording immediately on the spot.

Tilt up/down and to left/ right to select, and then press ￿ to designate.

1 Press ￿ button in the recording pause status.

Note:

•If the LCD monitor is open during playback of movie,

playback sound will be heard from the speaker. Adjust the sound volume using the volume control buttons (￿, ￿).

•To temporarily stop playback, press the ￿ button. Press the ￿ button again to restart playback.

•Even if you stop playback midway and immediately start recording again, the new image will be recorded after the last scene on disc or card (the previous images will not be overwritten).

•When playing back a still with a large number of pixels on card, “Playback.” will appear, and it will take some time for the still to appear.

•Depending on the amount of data to be played back, it may take some time for the playback image to appear.

•Do not operate the power switch or remove the card while the ACCCSS/PC or CARD ACCESS indicator is lit or blinking: Doing so may damage the card or the data on card.

The DVD video camera/recorder will enter the playback mode, and the scene you have recorded last will be played back.

When playback is finished, the DVD video camera/recorder will enter the pause status at the last image on disc.

If the playback pause status continues for as long as 5 minutes, the DVD video camera/recorder will automatically return to the recording pause status.

2 Press the ￿ button.

Playback will stop, and recording pause status will be restored.

English

67