Hitachi DZMV350A instruction manual 151

Message		Cause & Troubleshooting	Reference
			page
Card has no data.	This message will appear when the ￿ button is pressed with a
	card inserted on which no still is recorded. (It will appear if you		
	attempt playback or editing on Disc Navigation, but will not appear
	if you press ￿ on camera through image.)
Card is not formatted.	Was the card formatted on PC? When using the card on this DVD		127
Format the card now?	video camera/recorder, choose “YES” and format it.
Control Information	Mismatch may occur between the recorded image and scene
Error.	information.		128
	Update the control information.
	•	Use another disc.	22, 76
	•	See *3 on page 155.
COPY PROTECTED	The video signal input to this DVD video camera/recorder may be
	copy-guarded.
	Some prerecorded video materials, such as movies, are guarded		66
	against copying.
	Copy-guarded materials cannot be recorded on this DVD video
	camera/recorder.
DISC ACCESS	The recorded scene is being stored on disc.
	Wait until the message disappears, and you can start to use the		50, 53
	DVD video camera/recorder.
	This DVD video camera/recorder is verifying whether the correct
	disc has been inserted.
	Wait until the message disappears, and you can start to use the		
	DVD video camera/recorder.
	This message will be displayed for a little longer when the date
	changes.
DISC ALMOST FULL	The disc will soon be full, and recording will be impossible.
	Delete unnecessary scenes and try the disc again, or use another		26, 27, 101
	disc.
Disc error has occurred.	•	Disc error occurred during finalizing, and finalizing failed.
Finalizing is not		Replace the disc.	129
complete.	•	See *3 on 155
Disc error has occurred.	• Has the disc been initialized on PC? Has initializing the disc on
Format the disc now?		PC been interrupted?
		Choose “YES” and initialize the disc when using it on this DVD	127
		video camera/recorder. Initializing the disc will erase all data on it.
	•	See *2 on page 155.
Disc error has occurred.	The disc may be dirty.
Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before reusing
complete.	it, or use another disc.		76, 127
	This message may also appear if you insert a disc for which			English
	formatting was interrupted midway. In this case, use another disc.
Disc error has occurred.	Disc error could have occurred during editing of scenes.
Keep disc inside &	Turn off the DVD video camera/recorder with the disc being used in		40
restart.	it, connect AC adapter/charger, and then power the DVD video
	camera/recorder again. Repair of scenes will be tried.

151