Setups

This section explains preparations for recording - setting up the DVD video camera/recorder and battery.

Setting Up the DVD Video Camera/Recorder

HOLDING DVD VIDEO CAMERA/ RECORDER

Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb.

Put your hand in a position where you can easily operate the REC

button and the Zoom lever. Adjust the length of hand strap so that the

DVD video camera/ recorder is stable when

you press the REC button with your thumb.

Note:

Do not adjust the hand strap while holding the DVD video camera/recorder: Doing this could cause the DVD video camera/recorder to fall and be damaged.

ATTACHING LENS CAP

Caution:

Do not lift the DVD video camera/recorder by holding the viewfinder or LCD monitor: If the viewfinder or LCD monitor comes off, the DVD video camera/recorder will fall.

Pass the provided string through the hole in the lens cap and attach it to the hand strap of DVD video camera/recorder.

1 Use the string to attach the cap to the DVD video camera/recorder.

2 Push the both sides of cap inward and attach it over the lens.

English

Push and fit

Note:

Always keep the lens cap on when not using the DVD

video camera/recorder, to protect the lens.

When recording, attach the lens cap to the hand strap by hooking the tab inside the cap onto strap for comfortable shooting.

32

Page 32
Image 32
Hitachi DZMV350A Setting Up the DVD Video Camera/Recorder, Holding DVD Video CAMERA/ Recorder, Attaching Lens CAP