Hitachi DZMV350A instruction manual Magnifying Subject Image DIG. Zoom

MAGNIFYING SUBJECT IMAGE (DIG. ZOOM)

When the zoom lever is moved down to “T” control side with Dig. Zoom 40× or 240× specified, digital zoom will automatically kick in when optical 10× zoom range is exceeded. You can set the digital zoom to 40× or 240× for movie recording, or 40× for still recording.

1 Press the MENU button, choose “Dig. Zoom” on the “Camera Functions Setup” menu screen, and then press the ￿ button.

Came r a			F u nc t i on s	Se t u p
		P r og r am AE
		Wh i t e Ba l .
		E I S
		D i g . Zoom			240x
		M IC . F i l t e r			40x
					Of f
	ENTER		RETURN			RAM

0 : 0 0 : 0 0 REM3 0 MIN

FINE	8 : 0 0 AM
	9 / 3 0 / 2 0 0 3

When Dig. Zoom is "Off"

2 Choose the desired magnification, and then press the ￿button.

W T

When Dig. Zoom is "On"(40x)

W T Digital zoom range

3 Press the MENU button to end the setting.

Moving the zoom lever will display the digital zoom bar.

When Dig. Zoom is "On"(240x) (only in movie recording)

W T

Digital zoom range

Dig. Zoom “240×”, “40×” or “Off” setting will be stored in memory even if the DVD video camera/ recorder is turned off.

Note:

•You can check whether Dig. Zoom is “240×”, “40×” or “Off” by pressing the DISPLAY button and reviewing the on-screen information.

•You can also use the DIGITAL ZOOM button on remote control to switch the digital zoom setting: Pressing the button during movie recording will switch the setting between “Off”, “40×” and “240×”: Pressing the button during still recording will switch between “Off” and “40×”.

•When using card, zooming only up to 40× is possible, even when “240×” or “40×” has been chosen.

•If the power switch is set to “ ￿PHOTO” with DVD-RAM disc loaded, zooming only up to 40x is possible, even when “240×” has been chosen.

English

84