MACRO RECORDING

Use the macro function when recording a small object from close-up position: You can shoot the subject as close as approximately 3/8” (2 cm) from the lens surface, magnifying the image to fill the screen.

1 Aim the DVD video camera/recorder at the subject, and press down the zoom lever to “W” control side.

Note:

Zoom can be used, but the subject may not be focused, depending on the distance to the subject. In this case, move the zoom to “W” control side to focus.

The amount of light tends to be insufficient during macro recording: If the subject image is too dark, use additional lighting.

USING CONVERSION LENS (GENERALLY AVAILABLE)

Use generally available tele-conversion lens or wide-conversion lens with filter diameter of 30.5 mm. Remove the lens hood on the top surface of lens, and then attach the conversion lens over the lens.

Lens hood

Conversion lens

(Remove)

(Attach)

Note:

The four corners of screen may be dim depending on the conversion lens used.

English

56

Page 56
Image 56
Hitachi DZMV350A instruction manual Macro Recording, Using Conversion Lens Generally Available, Lens hood, Remove