Hitachi DZMV350A instruction manual Jumping to Specified Point GO to, Specifying the point to view

￿￿￿

JUMPING TO SPECIFIED POINT (GO TO)

1 Press the MENU button during playback.

2 Choose the option (point you want to go to), and then press the ￿button.

Go	To
	To p
	En d
	Spec i f y

ENTER RETURN RAM

Top	:To go to the start, and enter playback
	pause.
End	:To go to the end of last scene, and enter

playback pause.

Specify :To go to a specified point and enter playback pause. See the following for details.

English

●Specifying the point to view

1 Choose “Specify” in step 2 above, and then press the ￿ button.

The screen for specifying the point to go to will appear.

Position of currently	Total recording time of
played back image	all selected scenes

Go	t o
TOP
0 :		0	: 03: 26	0 : 24 : 24
Cursor
	GO TO 0		: 03: 26
	TOP	END	ENTER	CANCEL

Cursor position

2 Use the joystick to select the desired time of chosen point.

￿:To select the start.

￿:To select the end.

￿￿: ·Press once: To move the cursor in 10- second units (1-still units for card)

·Hold down: To move the cursor in 1- minute units (10-still units for card)

Go t o
TOP	CURRENT		END
0 : 00 : 00	0	: 03: 26	0 : 24 : 24
GO TO 0		: 00 : 00
TOP	END	ENTER	CANCEL

(When the start of scene is selected)

Cursor at current image position.

Cursor at (GO TO) position.

3 Press the ￿ button to enter the selection.

The DVD video camera/recorder will go to the specified point and enter the playback pause status.

To cancel the “Go To” procedure midway, press the

￿button before going to the specified point.

Note:

•If multiple scenes are selected using the Disc Navigation function or SELECT button, choosing “Top” will jump to the beginning of selected scenes (P. 125).

•When multiple scenes are selected, the total time of selected scenes will appear in the “total recording time” display.

•When card is loaded, the number of stills will appear.

•The cursor may not move at same-pitch intervals.

70