Multi-Tech Systems PN S000408C manual Technical Specifications, Modem Compatibility

Page 6

Chapter 1 – Product Description and Features

Technical Specifications

Your MultiModem II modem meets the following specifications:

Trade Name

MultiModem® II

Model Number

MT5600BA-V92

Server-to-Client

V.92/56K speeds when accessing a V.92 server

Data Rates

(actual speed depends on server capabilities and line conditions)

Client-to-Client

33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,

Data Rates

14400, 12000, 9600, 7200, 4800, 2400, 1200, 0-300 bps

Fax Data Rates

14400, 12000, 9600, 7200, 4800, 2400, 300 bps

Data Format

Synchronous and asynchronous

Commands

AT Commands, V.25bis

Command Buffer

60 characters

Modem Compatibility

V.92, V.90, 56K, V.34 enhanced, V.34, V.32terbo, V.32bis, V.32,

 

V.25bis, V.22bis, V.22; Bell 212A and 103/113; V.42, V.42bis; V.21 &

 

V.23 in international versions, V.44

Fax Compatibility

V.17/14.4K, Group 3, Class 1, 1.0, 2

Error Correction

V.42

Data Compression

V.44 (6:1 throughput), V.42bis, MNP Class 5 (2:1 throughput)

Speed Conversion

Serial port data rates adjustable to 300, 1200, 2400, 4800, 9600, 19200,

 

38400, 57600, 115200, and 230400 bps

Mode of Operation

Fax online modes; full duplex over dial-up and two-wire or four-wire

 

leased lines; data mode, command mode, online command mode, V.54

 

test mode

Flow Control

XON/XOFF (software), RTS/CTS (hardware)

Transmission Level

-11 dBm (dial-up—varies depending on country or region for which the

 

modem is set), -10 dBm (leased-line)

Frequency Stability

±0.01%

Receiver Sensitivity

-43 dBm under worst-case conditions

AGC Dynamic Range

33 dB

Connectors

One DB25F (RS-232C/D) connector; three RJ-11s

Cables

Three modular telephone cords (USA); country- or region-specific

 

cordage for International models; one 9-pin to 25-pin serial cable for

 

International models; external power transformer

 

Note: Any cables connected to the computer should be shielded to

 

reduce interference.

Indicators

32-character backlit LCD for status and configuration information; LEDs

 

for Transmit Data, Receive Data, Carrier Detect, Off Hook, Terminal

 

Ready, and Test Mode

Speaker

1-inch speaker for call progress monitoring

Manual Controls

Power switch, speaker volume control, four LCD control buttons

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide

6

Image 6
Contents MultiModem Revision Date Description Table of Contents Product Description Features FeaturesProduct Description Safety Warnings About AT CommandsTechnical Specifications Modem CompatibilityOperating Temperature Connect the Modem to Your System InstallationTwo-Wire or Four-Wire Leased Line Connection Connect the Modem to Your PCPower-On Test Install the Modem DriverConnect the Modem to the AC Power Outlet Installing the Modem DriverSetting Your Country or Region Code Using the LCD Panel Country or Region CodesUsing the Global Wizard Using AT CommandsInstall PhoneTools Using the Front Panel Modem ConfigurationLED Indicators Liquid Crystal Display LCD Option SelectionStatus Trunk Basic Options Trunk Basic Options Trunk Advanced Options Trunk Advanced Options Trunk Remote Configuration Options Trunk Diagnostic Options TrunkPhone Number Memory Options Trunk Caller ID Options TrunkSetting Country/Region Codes Trunk Caller ID Region SelectFunctionality of Menu Options StatusBasic Options Online OptionsCommand Mode Options Advanced Options RS232 OptionsCallback Security Remote Configuration Options Diagnostic OptionsPhone Number Memory Options Caller ID Options Region Select OptionsTwo-Wire / Four-Wire Setup Leased Line OperationFour-Wire Setup Dial BackupDial Backup and Leased Line Restore Setup Remote Configuration Basic ProcedureSetup Changing the Remote Configuration Password Changing the Remote Escape Character Setup Procedures Callback SecurityTurning Callback Security On and Off Assigning Callback Passwords Front Panel MethodAssigning Callback Phone Numbers Calling Procedure Callback Security Commands Default DescriptionTroubleshooting None of the Indicators LightModem Does Not Respond to Commands Modem Cannot Connect When DialingModem Cannot Connect When Answering Modem Disconnects While OnlineThere Are Garbage Characters on the Monitor File Transfer Is Slower Than It Should BeData Is Being Lost Modem Doesn’t Work with Caller IDAppendix a Regulatory Compliance FCC Part 68 TelecomEMC, Safety, and R&TTE Directive Compliance Canadian Limitations NoticeInternational Modem Restrictions New Zealand Telecom Warning Notice South African NoticeIntroduction Upgrade OverviewAppendix B Upgrading Firmware Identify the Modem FirmwareUpgrade the Modem’s Firmware Download the Upgrade FileExtract the Upgrade Files Clear Your Stored ParametersRestore Your Parameters Using the Modem to Call the Internet Appendix C Installing a Modem Under LinuxInstallation Standard Linux Serial Port DefinitionsCalling the ISP Answering CallsAppendix D Pin Descriptions RS-232 Pin DescriptionsRS-232 Cable Pinouts Leased Line PinoutsWeee Directive Appendix F Rohs HT/TS Substance Concentration Index #DBRegisters

PN S000408C specifications

The Multi-Tech Systems PN S000408C is a versatile and compact communication device designed for a wide range of applications in various industries. This device is primarily known for its robust performance, making it an ideal choice for developing Internet of Things (IoT) solutions, machine-to-machine (M2M) communications, and other telemetry applications.

One of the main features of the S000408C is its ability to support multiple communication protocols, which enhances its flexibility and interoperability with different systems. This device can seamlessly integrate with cellular, Ethernet, and serial interfaces, providing users the capability to implement diverse connectivity solutions. Its versatility enables it to function effectively in remote monitoring, data logging, and industrial automation scenarios.

The S000408C is engineered to work with multiple wireless technologies, including LTE, GSM, and CDMA, ensuring reliable connectivity across various geographical locations. This feature is essential for applications where consistent communication is necessary, such as in asset tracking and fleet management. Additionally, the device is compatible with various network configurations, making it suitable for both urban and remote deployments.

In terms of characteristics, the device stands out with its compact design, which allows for easy installation even in space-constrained environments. It features a rugged enclosure that is built to withstand harsh conditions, making it ideal for outdoor use. The S000408C is also equipped with power management capabilities, allowing for energy-efficient operation, which is crucial for battery-powered applications.

Moreover, the Multi-Tech S000408C prioritizes security, as it comes with built-in encryption features to protect data integrity during transmission. This aspect is particularly important for industries dealing with sensitive information, such as healthcare and finance.

The configuration process of the S000408C is straightforward, supported by comprehensive documentation and user-friendly software tools. This makes it accessible to developers and engineers, enabling them to rapidly deploy solutions without extensive training.

In conclusion, the Multi-Tech Systems PN S000408C is a powerful tool for businesses and developers aiming to harness the power of connectivity in their operations. With its multi-protocol support, robustness, and security features, it is well-positioned to meet the demands of today's connected world. As industries continue to evolve with the integration of IoT technologies, devices like the S000408C will remain at the forefront of enabling communication and operational efficiency.