Multi-Tech Systems MT2456SMI22 manual Summary of S-Parameter Defaults, Ascii

Chapter 4 - V.22bis Commands

Summary of S-Parameter Defaults

Register	Function	Range/Units		Default*
S0	Rings to Auto-Answer	0-255	rings	0
S1	Ring Counter	0-255	rings	0
S2	Escape Character	0-255	ASCII	43
S3	Carriage Return Character	0-127	ASCII	13
S4	Line Feed Character	0-127	ASCII	10
S5	Backspace Character	0-255	ASCII	8
S6	Wait Time before Blind Dialing or for Dial Tone	2-255	s	2
S7	Wait Time for Carrier, Silence, or Dial Tone	1-255	s	50
S8	Pause Time for Dial Delay Modifier	2-255	s	2
S9	Carrier Detect Response Time	1-255	0.1 s	6
S10	Lost Carrier To Hang Up Delay	1-255	0.1 s	14
S11	DTMF Tone Duration	50-255 0.001 s		85
S12	Escape Prompt Delay (EPD)	0-255	0.02 s	50
S14	General Bit Mapped Options Status			138 (8Ah)
S16	Test Mode Bit Mapped Options Status			0
S19	Reserved			0
S20	Reserved			0
S21	V.24/General Bit Mapped Options Status			52 (34h)
S22	Speaker/Results Bit Mapped Options Status			117 (75h)
S23	General Bit Mapped Options Status			0
S24	Sleep Inactivity Timer	0-255	s	0
S25	Delay to DTR Off	0-255 s or 0.01 s		5
S26	RTS-to-CTS Delay	0-255	0.01 s	1
S27	General Bit Mapped Options Status			73 (49h)
S28	General Bit-Mapped Options Status			0
S29	Flash Dial Modifier Time	0-255	10 ms	70
S30	Disconnect Inactivity Timer	0-255	10 s	0
S31	General Bit-Mapped Options Status			192 (C0h)
S36	LAPM Failure Control			7
S38	Delay Before Forced Hangup	0-255	s	20
S39	Flow Control Bit Mapped Options Status			3
S40	General Bit-Mapped Options Status			104 (68h)
S41	General Bit-Mapped Options Status			195 (C3h)
S86	Call Failure Indication	0-26		21
S91	PSTN Transmit Attenuation Level	0-15	dBm	10 (Country
				dependent)
S95	Extended Result Codes Control			0
* Default values may be modified using patch code.

Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide 36