Lightwave Communications | PC ServerSwitch 2x16 |
3.1.2 Main Menu: Jump to Port...
Jump to Port - Jump directly to any port from the Main Menu by entering either the port name or port number. Select Jump to port and press Enter.
Lightwave Communications Inc.
Curr: File Server 1
DPCSS System Setup
no Auto scan
Jump to port...
Disabled
File Server 1 | 1 |
File Server 2 | 2 |
Print Server | 3 |
Email Server | 4 |
Engineering | 5 |
Enterprise | 6 |
Firewall | 7 |
Fax Server | 8 |
Next unit Esc exits
The screen will change to the following 'Enter port' prompt:
no Auto scan Enter port:
Disabled
Enter the port name or port number, and press Enter. You will be immediately switched to that port (if available) and exit the
NOTE: When entering the port name, make sure you enter the name as case sensitive if “Case sensitive names” is selected in the System Setup menu. If you would like to enter names ignoring case, select “Ignore Case in Names” in the System Setup menu.
www.lightwavecom.com | Page 10 of 24 |