Lightwave Communications 2X16 On-Screen Menus, Main Menu, Navigating the on-screen menus

Lightwave Communications PC ServerSwitch 2x16

3.0 On-Screen Menus

On-screen Menus are used for two purposes:

•Server Port selection for a Console

•System setup programming for the PC ServerSwitch 2x16

On-Screen Menus are displayed on the User's monitor. Either Console may administer the system, but only one user may edit the setup at a time.

NOTE: While in the on-screen menu mode, the "Caps Lock", "Num Lock", and "Scroll Lock" LEDs will flash on the User Console’s keyboard.

Navigating the on-screen menus

•Press both Control keys (Cntl-Cntl) to access the on-screen menus, or press the Scroll Lock key twice

•Up Arrow/Down Arrow

•+ and - keys on number pad

•Enter (select or scroll through options)

•Esc to exit, or to back up one level

•Most options have a single-character hot-select key, highlighted and capitalized on the screen. Press that letter to select that option.

3.1Main Menu

Pressing and releasing both CONTROL buttons (Ctrl-Ctrl) on either Console's keyboard will bring up the main menu of the PC ServerSwitch 2x16.

Lightwave Communications Inc.

Curr: File Server 1

DPCSS System Setup

no Auto scan
Jump to port...
Disabled
File Server 1	1
File Server 2	2
Print Server	3
Email Server	4
Engineering	5
Enterprise	6
Firewall	7
Fax Server	8

Next unit Esc exits

Note: This window will show the current server port (e.g., Curr: File Server 1). Window color settings may be different than above.

www.lightwavecom.com Page 7 of 24