Lightwave Communications | PC ServerSwitch 2x16 |
3.1.1 Main Menu: Auto Scan
During auto scan the PC ServerSwitch 2x16 will scan through each PC, stopping at each active port for the duration assigned in the System Setup menu. The port name and number will appear as the attached PCs are scrolled through.
Exiting the menus using the Escape key will either send the user into auto scan mode or to a single PC, depending on which option is selected.
•To exit the auto scan mode, press any key on your keyboard.
•Return to the main menu by pressing
•To exit the
Use the + and - keys on the number pad of your keyboard, or [A] key, for 'start Auto scan' or 'no Auto scan'. Also see Section 3.2.1 for Server Port Setup for Auto Scan.
NOTE: Server Ports can be individually programmed to be Scanned or Not Scanned. Only PCs that are set to be scanned, and are connected and powered on will be scanned.
Lightwave Communications Inc.
Curr: File Server 1
DPCSS System Setup
no Auto scan
Jump to port... |
|
Disabled |
|
File Server 1 | 1 |
File Server 2 | 2 |
Print Server | 3 |
Email Server | 4 |
Engineering | 5 |
Enterprise | 6 |
Firewall | 7 |
Fax Server | 8 |
Next unit Esc exits
www.lightwavecom.com | Page 9 of 24 |