Lightwave Communications | PC ServerSwitch 2x16 |
5.0 Installation
The PC ServerSwitch 2x16 unit is designed to occupy 3.50 inches of rack space. Sufficient space is required behind the rear panel of the unit to allow for attached cables bend radius (6 inches should be sufficient). It is helpful to plan ahead if additional units might be added to the configuration at some later date. If cascading (adding PC ServerSwitch 2x16’s) is to be used, make certain to leave enough space in the rack for additional units. The PC ServerSwitch 2x16 installation can be expanded at any time, without interfering with servers connected to existing switches.
Figure 5: PC ServerSwitch 2x16 – Front and Rear panels
STEP 1 -- Unpacking the Items
Verify that the following items are located in the packaging.
•(1) PC ServerSwitch 2x16
•(1) AC Power Cordset
•(1) Cable - DB9 Female to Male Serial data cable (6 foot long)
•(1) PC ServerSwitch 2x16 Product Handbook
•Cables, as required for your number of servers and units.
NOTE! Optional cable kits are available. (1) Kit contains:
•(2)
•(1) HD15
NOTE! Other items may be ordered or shipped separately.
www.lightwavecom.com | Page 17 of 24 |