Linear RE-1 To Enter Programming Mode, To Exit Programming Mode & Save Changes, Call Forwarding

RESIDENT PROGRAMMING QUICK REFERENCE

Some of the programming PPN’s may be commonly used by the resident. Following are quick references to the keystrokes required.

✦NOTE: The “###” is the default command prefix. The following example assumes that the default has not been changed.

To Enter Programming Mode

Press: Master Code

Master Code = the current 6-digit Master Programming Code

To Exit Programming Mode & Save Changes

Press:

Re-entering a Command After a Mistake

If an incorrect entry, or an incorrect key is pressed during programming, to clear the keypad:

Press:

Adding a Entry Code

Press: Code Code Relay Time Zone

Code = The new entry code: 1-999999, depending on code length

Relay = Relay output entry code will activate:

1 = Relay #1 2 = Relay #2 3 = Both Relays

4 = Relay #1 as priority user (no access restrictions)

Time Zone = 0 = no time zone; 1-7 to restrict access per time zone 1-7

Adding a Temporary Entry code

Press: Code Code Relay Time Zone Number

Valid From Valid Thru

Code = The new entry code: 1-999999, depending on code length Relay = Relay output entry code will activate:

1 = Relay #1 2 = Relay #2 3 = Both Relays

Time Zone = 0 = no time zone; 1-7 to restrict access per time zone 1-7 Number = Number of times (1-255) that the entry code is allowed access Valid From = First date (MMDDYY) that the entry code is valid

Valid Thru = Last date (MMDDYY) the entry code is valid.

Removing a Single Entry Code

Press: Code Code

Code = The entry code to remove.

Suspend or Activate a Single Transmitter

Press: Facility ID Action

Facility = Facility code 1-16 of transmitter (0 = no facility code)

ID = 5-digit ID number of transmitter

Action: 0 = Suspend transmitter; 1 = Re-activate transmitter

Maximum Number of Visitor Rings

Press: Rings

Rings = 1-15 Rings maximum

Visitor Talk Time Limit

Press: Limit

Limit = 15-255 Seconds allowed

Call Waiting Feature On/Off

Press: Call Waiting

Call Waiting: 1 = ON; 0 = OFF

Call Forwarding

Press: Forwarding Time Zone Telephone Number

Extension Delay

Forwarding: 0 = Call forwarding feature OFF

1 = Call forwarding feature ON at all times

2 = Call forwarding feature ON (scheduled by Time Zone) Time Zone = 1-7 (Call forwarding feature active during this Time Zone) Telephone Number = Up to 11-digit telephone number

Extension = Up to 4-digit telephone extension number

Delay = 1-25 seconds (delay between telephone number and extension)

Example:

Press: Telephone Number

“Do Not Disturb” Privacy Feature On/Off

Press:			Privacy	Time Zone
Privacy:	0	= Privacy feature OFF
	1	= Privacy feature ON (scheduled by Time Zone)
	2	= Privacy feature ON at all times

Time Zone = 1-7 (Privacy feature active during this Time Zone)

Automatic Door/Gate Open Time

Press:		Relay	1st Time Zone	2nd Time Zone
Relay:	1 = Relay #1
	2 = Relay #2

1st Time Zone = Time Zone 1-7

2nd Time Zone = Time Zone 1-7 (enter “0” if the 2nd time zone is not used)

Setting Time Zones

Press: Time Zone Number Active Days Start Hour

Start Minute AM/PM End Hour End Minute AM/PM

Time Zone Number = 1-7

Active Days (Enter up to 8 digits):

1 = Sun; 2 = Mon; 3 = Tue; 4 = Wed; 5 = Thu; 6 = Fri; 7 = Sat; 8 = Holidays Start Hour = 1-12 Start Minute = 0-59 AM/PM: 0 = AM; 1 = PM

End Hour = 1-12 End Minute = 0-59 AM/PM: 0 = AM; 1 = PM

Setting the Holiday Days

Press: Holiday Number Month Day

Holiday Number = 1-10

Month = 1-12

Day = 1-31

26