Liebert 232 user manual LGM Module Driver, Parameter

LGM Module Driver

Parameter Page

Function Block		Type: LGM (LGM Module Driver)
Name SiteGate-232				Line 1 LG	2 CM 1	FB 15 Flags —
ID ID14	Tele		NB	All Options Y		Type 67 Ver 1
Power Up Delay		0	(sec)	Demand Controller Address 0		,0
Update Time	0:00		(mm:ss)

BACnet	Device Parameters:
Use	default	device object name?		Y
Use	default	device object ID?		Y
APDU Timeout			3000
Number of APDU Retries ...			0

Device Name =

Device ID = (device object, 0) (milliseconds)

GFB performance tuning:

=======================

Time slice per GFB = 5000 milliseconds.

CMnet Parameters:

General:

Generate a “Dead Module” alarm after 10 minutes of no communications

with a control module.
Zero compression enabled? YES
Output character pacing? (reduces throughput by 50%)		NO
Delay before sending all replies (20 msec minimum) = 20			msec.
Interpacket delay .............. (20	msec minimum) = 20		msec.
Alternate interpacket delay .... (40	msec minimum) = 40		msec.

CMnet	Tuning Parameters: (Tech Support Only)
Time to wait			for	‘?’ before	attempting intrusive grab =		500	msec.
Maximum		number of intrusive			grab attempts per request =		3
Grab Silence			Time			=	600	msec.
Time to		hold	the	token when	the token wraps around	=	1	seconds

Time to wait for each module to acknowledge the token = 500				msec.
Maximum online time per successful grab =			0:50 (mm:ss)
Maximum monitor time per monitor request =			5:00 (mm:ss)
Console	Port #1 Parameters:
Modem	installed on this console port = NO
Modem control parameters:
Modem	Reset ATV0E0Q0S0=1S7=60
Dial Prefix ATDT
Phone	Number
Use This Number? NO		(NO = use number from	SETGCM )
If not connected, and		with no alarms pending delivery, reset modem
every	5:00 (mm:ss).	Note: the minimum value for this is 5:00.

If connected, but no activity has been detected for 20:00 (mm:ss),

hang up and reset modem.
After	dialing, wait	2:00 (mm:ss) for connection before hanging up.
After	unsuccessful alarm delivery, wait 5:00 (mm:ss) before
trying again.
Escape (+++) guard time			1000	msec.
Post hangup delay			1000	msec.
Reset	time (DTR low)		1000	msec.
Post DTR high delay			500	msec.
Post reset string delay			1000	msec.
Console	Port #2 Parameters:
Modem	installed on this		console port = NO
Modem control parameters:
Modem	Reset ATV0E0Q0S0=1S7=60
Dial Prefix ATDT
Phone	Number
Use This Number? NO		(NO = use number from SETGCM )

Rev. (08-JULY-98) 15 © 1996-98 Liebert Corporation