LevelOne FPS-2003TXU, FPS-2111TXU, FPS-2101USB, FPS-2013TXU, FPS-2101TXU Select Printer Port NDS

Page 42

NetWare

•Password - Change the login password used by the LevelOne Printer Server when it connects to the NetWare server. By default, there is no password. See Password (NDS) for details.

Printer button

1.After selecting Printer above, the NetWare printer objects (1 for each port on the LevelOne Printer Server) will be created if they do not yet exist.

2.The next screen (shown below) allows you to select the desired port on the LevelOne Printer Server. This also selects the printer object. You can NOT change the printer object associated with the port.

Figure 23: Select Printer Port (NDS)

3.After clicking on the button for the desired port, you will see a screen like the following example. Use this screen to assign queue(s) to the printer object associated with the selected port.

Assigning Printer Queues (Required)

Figure 24: Assign Queues (NDS PS mode)

This screen displays the current NetWare Printer Object at the top of the screen.

Queues serviced by the current Printer Object are listed on the left, and other queues (in the current context) on the right.

•Use the Change Context button to change the current context. The Available Queues list on the right will then change to show the queues available in that context.

•Create a new queue by clicking New Queue. Enter the new name, and select the desired context.

•Assign an existing queue by selecting a queue on the right, and clicking the “<<” button.

- 39 -

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Level One Printer Servers Table of Contents Specifications Special FeaturesTroubleshooting Windows NT Server TCP/IPFeatures IntroductionYear 2000 Compliance Safety Instructions Package Contents Models EPS-3001TU 10BaseT Direct AttachDescription FPS-3001TXU 100BaseT Direct Attach Item DescriptionFPS-2111TXU FPS-2101TXU FPS-2013TXU FPS-2003TXU FPS-2101USB DIP Switches FPS-2111TXU & FPS-2013TXU LED IndicatorsDIP Switches FPS-2101TXU & FPS-2003TXU Green LED Red/Orange LED Status DescriptionDiagnostic Push Button To restore the factory default settingsTo generate a Diagnostic print out Find the Default LevelOne Printer Server Name LAN InstallationProcedure Connect the PrintersPower Up and Check Configuration Required ConfigurationConfiguration Methods & Utilities WebAdmin WPConfigRequirements BiAdmin Utility ProgramInstallation Additional RecommendationsBiAdmin Main Screen Main ScreenGroups Device ListConfiguration Icons Status IconsOther Icons Menu Options Status MenuInitDevice Menu Configuration Menu Diagnostics menuControl Menu Software Requirements AppleTalk SetupAppleTalk PrintingWindows Software Advanced Setup and ManagementChanging the Device Configuration Macintosh SoftwareApple Zone AppleTalk SettingsDevice Name APPCOMM1 No APPCOMM2 No APPCOMM4 NoNetWare Configuring NetWareConfiguring the LevelOne Printer Server OverviewConfiguration Methods Using BiAdmin with Client PreparationPrint Server Mode Bindery DataButtons NetWare Configuration Button Bindery Quickset Button BinderyIf you have multiple File Servers If you have a single File Server Printer Button Select Printer Port BinderyAssigning Printer Queues Required Assign Queues BinderyTo Assign Users to Queues Required To assign operators to Queues OptionalPassword NetWare Password Bindery PS ModePrint Server Mode NDS NetWare Configuration Button NDS Quickset Button NDSSelect Printer Port NDS Assign Users to Queue NDS PS mode To assign operators to the Print Queue OptionalPassword NDS NetWare Password NDS PS ModeRemote Printer Mode Bindery Remote Printer Mode NDS Current ContextNdps NetWare OverviewCreating an Ndps Manager Object Creating an Ndps Printer Agent Load NdpsmWorkstation Configuration ProcedureNdps Manager Client Web Browser Configuration Example UnixExample Windows Connecting to the LevelOne Printer Server TCP/IP Configuration Data TCP/IP ScreenOther Screens Logical Printer ConfigurationLogical Printer Setup Data String Before JobTelnet OperationUnix IP Address ConfigurationProcedure Software RequirementsPrinting Methods Overview Using BootpUsing Rarp Direct Socket InterfaceLPD Printing Configuration LPD on IBM AIXFTP File Transfer Protocol Action Sample Command LPD on SystemAdding Remote Printers LPD on BSD Printing using LPD Other Printing Methods Printing Using DSIPrinting Using PSfilter Logical Printer No Socket NoLevelOne Printer Server Configuration Windows NT Server TCP/IPWindows NT Host Configuration Host File Entry OptionalWindows NT Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer WindowsWindows NT Server TCP/IP Command Line Printing with Windows NTWindows Applications Setup Windows Peer-to-PeerIf your LevelOne Printer Server is not listed Add Port Peer-to-peer Print DriverConfigure Printer Port ManagementPort Options BannerRetry Interval System Requirements Special FeaturesInternet Printing Mail ServerInternet Printer Server User Client RequirementsInternet Mail Printing Configuration Installation User SoftwareUser Software Following data must be provided Using the new Port Checking the Printer DriverCanceling a Print Job Printing through the InternetManagement Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Trap Receiving Station SettingsTrap Severity Troubleshooting Hardware ProblemsProblem No All the LevelOne Printer Server’s LEDs are off Printing General Problem NoBiAdmin is grayed out, even though my printer in bi DirectionalProblem No My file doesn’t print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didn’t print to the right printer Problem No My EPS file doesn’t print with the correct fontsLevel One Printer Servers NetWare 2.x Problem No My LevelOne Printer Server prints garbageNetWare NetWare 4.x bindery and NDS modesSet Allow service by current print servers to YES Troubleshooting Then select Print Server Configuration and select Queues Problem No PSConfig shows No ResponseCannot receive Notify message in NetWare 4.x environment Problem No LevelOne Printer Server device is not recognized TCP/IP Unix & Windows NTProblem No I can’t print using LPD Problem No I can’t print using PSfilterTo remove an existing printer port installation Windows Peer-to-peerTroubleshooting Then select File Properties Details Problem No a print job is printing garbage Problem No I don’t know my Mail Server’s IP AddressProblem No Plain text E Mails are not printed Problem No Two print jobs are printing on the sameProblem No Only the banner page was printed Select Properties DetailsEPS-3001TU SpecificationsDirect Attach Models FCC StatementFPS-3001TXU Environmental Specifications Parallel Port Pin AssignmentsOther Models Strobe To printer +Data Level One Printer Servers

FPS-2111TXU, FPS-2101TXU, FPS-2003TXU, FPS-2013TXU, FPS-2101USB specifications

LevelOne has established itself as a reputable brand that offers a diverse range of high-quality networking products. Among its impressive catalog, the devices EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU stand out for their unique features and capabilities tailored to meet various networking needs.

The LevelOne EPS-3001TU is an advanced PoE (Power over Ethernet) injector that enhances network efficiency by transmitting both power and data through a single cable. This device supports IEEE 802.3af PoE standards, making it compatible with a wide array of PoE-enabled devices such as IP cameras and wireless access points. With a compact design, the EPS-3001TU is easy to install and ideal for environments where space is a concern. Its LED indicators provide real-time feedback on power and data transmission, ensuring reliable performance at all times.

The FPS-2003TXU is a robust network switch designed to facilitate seamless data flow in various applications. Featuring 3 Gigabit Ethernet ports, it offers a high-speed data transfer rate that minimizes latency. Plug-and-play functionality allows for effortless integration into existing networks, while its compact and fanless design ensures quiet operation, making it suitable for office environments. The FPS-2003TXU also boasts energy-efficient technology, reducing overall power consumption without compromising performance.

The FPS-2101USB, on the other hand, combines the traditional switch functionality with USB connectivity. This unique feature allows users to easily connect USB devices directly, thereby broadening the scope of network sharing. Ideal for small offices, the FPS-2101USB supports multiple simultaneous connections, enhancing productivity and collaboration among users. The device is designed for simplicity, ensuring easy setup and management.

Similarly, the FPS-2101TXU and FPS-2111TXU are reliable managed switches that offer extensive management features and enhanced security protocols. Both models come with multiple ports for optimal connectivity and support high-definition video and voice traffic. They are equipped with VLAN support, allowing for efficient traffic segmentation and improved network performance. Moreover, their robust security features, including port security and access control lists, ensure that network integrity is maintained.

In conclusion, LevelOne's EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU devices provide a strong foundation for building and managing efficient networks. With a combination of innovative features, user-friendly design, and reliable performance, these products cater to the needs of both home and business environments, ensuring that users get the most out of their networking infrastructure.
Top Page Image Contents