LevelOne FPS-2101TXU, FPS-2003TXU manual AppleTalk, Problem No Why do I get an incorrect printout?

Page 82

Troubleshooting

AppleTalk

Problem No. 1 Why do I get an incorrect printout?

Solution No. 1 Some possible reasons are:

• You may have chosen Binary encoding to print the file. Try to use ASCII encoding.

• Some of the fonts in your print file may not be supported by the printer. Try selecting LaserWriter 7 instead of LaserWriter 8.

Problem No. 2

 

Can’t find the LevelOne Printer Server’s name in the Chooser.

 

 

 

Solution No. 2

 

Try the following:

 

 

1.

Make sure that AppleTalk is on (the button next to Active is

 

 

 

highlighted in the Chooser).

 

 

2.

Make sure the printer has been on and in the READY state for

 

 

 

a few minutes.

 

 

3.

Make sure the printer has not been renamed since its last

 

 

 

appearance in the Chooser.

 

 

4.

If the printer resides on a network with multiple zones, make

 

 

 

sure the correct zone is selected from the AppleTalk Zones box

 

 

 

in the Chooser.

 

 

 

 

Problem No. 3

 

My document didn’t print to the right printer.

 

 

 

Solution No. 3

 

Check the following:

 

 

• Another LevelOne Printer Server with the same name may

 

 

have received your print job. Use the PSTOOL to reconfigure

 

 

your LevelOne Printer Server name and ensure all LevelOne

 

 

Printer Servers have unique names.

 

 

• Make sure your application output encode is set to ASCII. If

 

 

not, change it to ASCII.

 

 

 

Problem No. 4

 

My file doesn’t print with the correct fonts.

 

 

 

Solution No. 4

 

Try using the LaserWriter 7 printer driver.

 

 

 

Problem No. 5

 

My EPS file doesn’t print with the correct fonts.

 

 

 

Solution No. 5

 

This is a problem that occurs in some application programs. Try

 

 

downloading the fonts contained in the EPS file before printing the

 

 

saved EPS file.

 

 

 

Problem No. 6

 

I can’t select the “Remaining from:” item in the print dialog

 

 

box.

 

 

 

Solution No. 6

 

If you have selected the Layout value, 2 Up, or 4 Up, you cannot

 

 

access the Remaining from: item. Choose other selections.

 

 

 

Problem No. 7

 

A cover page prints either on the first or the last page of the

 

 

document.

 

 

 

Solution No. 7 Select one of these solutions:

•Turn the cover page feature off.

•Insert extra page breaks in your document to avoid the cover

- 79 -

Page 81 Page 83
Image 82
Page 81 Page 83
Contents Level One Printer Servers Table of Contents Specifications Special FeaturesTroubleshooting Windows NT Server TCP/IPIntroduction FeaturesYear 2000 Compliance Safety Instructions Package Contents EPS-3001TU 10BaseT Direct Attach ModelsDescription FPS-3001TXU 100BaseT Direct Attach Item DescriptionFPS-2111TXU FPS-2101TXU FPS-2013TXU FPS-2003TXU FPS-2101USB DIP Switches FPS-2111TXU & FPS-2013TXU LED IndicatorsDIP Switches FPS-2101TXU & FPS-2003TXU Green LED Red/Orange LED Status DescriptionTo restore the factory default settings Diagnostic Push ButtonTo generate a Diagnostic print out Find the Default LevelOne Printer Server Name LAN InstallationProcedure Connect the PrintersPower Up and Check Required Configuration ConfigurationConfiguration Methods & Utilities WebAdmin WPConfigRequirements BiAdmin Utility ProgramInstallation Additional RecommendationsBiAdmin Main Screen Main ScreenGroups Device ListConfiguration Icons Status IconsOther Icons Status Menu Menu OptionsInitDevice Menu Diagnostics menu Configuration MenuControl Menu Software Requirements AppleTalk SetupAppleTalk PrintingWindows Software Advanced Setup and ManagementChanging the Device Configuration Macintosh SoftwareApple Zone AppleTalk SettingsDevice Name APPCOMM1 No APPCOMM2 No APPCOMM4 NoNetWare Configuring NetWareConfiguring the LevelOne Printer Server OverviewConfiguration Methods Using BiAdmin with Client PreparationData Print Server Mode BinderyButtons Quickset Button Bindery NetWare Configuration Button BinderyIf you have multiple File Servers If you have a single File Server Printer Button Select Printer Port BinderyAssigning Printer Queues Required Assign Queues BinderyTo Assign Users to Queues Required To assign operators to Queues OptionalPassword NetWare Password Bindery PS ModePrint Server Mode NDS NetWare Configuration Button NDS Quickset Button NDSSelect Printer Port NDS Assign Users to Queue NDS PS mode To assign operators to the Print Queue OptionalPassword NDS NetWare Password NDS PS ModeRemote Printer Mode Bindery Remote Printer Mode NDS Current ContextOverview Ndps NetWareCreating an Ndps Manager Object Creating an Ndps Printer Agent Load NdpsmWorkstation Configuration ProcedureNdps Manager Client Example Unix Web Browser ConfigurationExample Windows Connecting to the LevelOne Printer Server TCP/IP Configuration Data TCP/IP ScreenOther Screens Logical Printer ConfigurationLogical Printer Setup Data String Before JobTelnet OperationUnix IP Address ConfigurationProcedure Software RequirementsPrinting Methods Overview Using BootpUsing Rarp Direct Socket InterfaceLPD on IBM AIX LPD Printing ConfigurationFTP File Transfer Protocol LPD on System Action Sample CommandAdding Remote Printers LPD on BSD Printing using LPD Other Printing Methods Printing Using DSIPrinting Using PSfilter Logical Printer No Socket NoLevelOne Printer Server Configuration Windows NT Server TCP/IPWindows NT Host Configuration Host File Entry OptionalWindows NT Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer WindowsWindows NT Server TCP/IP Printing with Windows NT Command LineWindows Applications Setup Windows Peer-to-PeerIf your LevelOne Printer Server is not listed Add Port Peer-to-peer Print DriverConfigure Printer Port ManagementBanner Port OptionsRetry Interval System Requirements Special FeaturesInternet Printing Mail ServerInternet Printer Server User Client RequirementsInstallation User Software Internet Mail Printing ConfigurationUser Software Following data must be provided Using the new Port Checking the Printer DriverCanceling a Print Job Printing through the InternetManagement Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Trap Receiving Station SettingsTrap Severity Hardware Problems TroubleshootingProblem No All the LevelOne Printer Server’s LEDs are off Printing General Problem NoBiAdmin is grayed out, even though my printer in bi DirectionalProblem No My file doesn’t print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didn’t print to the right printer Problem No My EPS file doesn’t print with the correct fontsLevel One Printer Servers NetWare 2.x Problem No My LevelOne Printer Server prints garbageNetWare NetWare 4.x bindery and NDS modesSet Allow service by current print servers to YES Troubleshooting Then select Print Server Configuration and select Queues Problem No PSConfig shows No ResponseCannot receive Notify message in NetWare 4.x environment Problem No LevelOne Printer Server device is not recognized TCP/IP Unix & Windows NTProblem No I can’t print using LPD Problem No I can’t print using PSfilterTo remove an existing printer port installation Windows Peer-to-peerTroubleshooting Then select File Properties Details Problem No a print job is printing garbage Problem No I don’t know my Mail Server’s IP AddressProblem No Plain text E Mails are not printed Problem No Two print jobs are printing on the sameProblem No Only the banner page was printed Select Properties DetailsEPS-3001TU SpecificationsDirect Attach Models FCC StatementFPS-3001TXU Environmental Specifications Parallel Port Pin AssignmentsOther Models Strobe To printer +Data Level One Printer Servers

FPS-2111TXU, FPS-2101TXU, FPS-2003TXU, FPS-2013TXU, FPS-2101USB specifications

LevelOne has established itself as a reputable brand that offers a diverse range of high-quality networking products. Among its impressive catalog, the devices EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU stand out for their unique features and capabilities tailored to meet various networking needs.

The LevelOne EPS-3001TU is an advanced PoE (Power over Ethernet) injector that enhances network efficiency by transmitting both power and data through a single cable. This device supports IEEE 802.3af PoE standards, making it compatible with a wide array of PoE-enabled devices such as IP cameras and wireless access points. With a compact design, the EPS-3001TU is easy to install and ideal for environments where space is a concern. Its LED indicators provide real-time feedback on power and data transmission, ensuring reliable performance at all times.

The FPS-2003TXU is a robust network switch designed to facilitate seamless data flow in various applications. Featuring 3 Gigabit Ethernet ports, it offers a high-speed data transfer rate that minimizes latency. Plug-and-play functionality allows for effortless integration into existing networks, while its compact and fanless design ensures quiet operation, making it suitable for office environments. The FPS-2003TXU also boasts energy-efficient technology, reducing overall power consumption without compromising performance.

The FPS-2101USB, on the other hand, combines the traditional switch functionality with USB connectivity. This unique feature allows users to easily connect USB devices directly, thereby broadening the scope of network sharing. Ideal for small offices, the FPS-2101USB supports multiple simultaneous connections, enhancing productivity and collaboration among users. The device is designed for simplicity, ensuring easy setup and management.

Similarly, the FPS-2101TXU and FPS-2111TXU are reliable managed switches that offer extensive management features and enhanced security protocols. Both models come with multiple ports for optimal connectivity and support high-definition video and voice traffic. They are equipped with VLAN support, allowing for efficient traffic segmentation and improved network performance. Moreover, their robust security features, including port security and access control lists, ensure that network integrity is maintained.

In conclusion, LevelOne's EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU devices provide a strong foundation for building and managing efficient networks. With a combination of innovative features, user-friendly design, and reliable performance, these products cater to the needs of both home and business environments, ensuring that users get the most out of their networking infrastructure.
Top Page Image Contents