LevelOne FPS-2013TXU, FPS-2003TXU, FPS-2111TXU manual Printing General, Problem No, Directional

Page 81

Level One Printer Servers

Printing - General

Problem No. 1 When using 10BaseT cabling, the LevelOne Printer Server unit does not work.

Solution No. 1 Check the Hub’s link LED for the port to which the LevelOne Printer Server is connected. If it is off, there is a problem in the network cable. If using 10BaseT or 100BaseT, check the LED next to the connector. It should be on if the network connection is OK.

Problem No. 2

 

A printing device connected to the a LevelOne Printer Server

 

 

port cannot print or prints garbage.

 

 

 

Solution No. 2

 

Check the following:

 

 

Cable connection between LevelOne Printer Server and printer.

 

 

Printer driver in the application program or Windows matches

 

 

the printer.

 

 

 

Problem No. 3

 

The Configuration button on the Printer Status screen in

 

 

BiAdmin is grayed out, even though my printer in bi-

 

 

directional.

 

 

 

Solution No. 3

 

The button is unavailable if the printer is busy. You must wait until

 

 

the printer is idle.

 

 

 

- 78 -

Image 81
Contents Level One Printer Servers Table of Contents Troubleshooting Special FeaturesSpecifications Windows NT Server TCP/IPFeatures IntroductionYear 2000 Compliance Safety Instructions Package Contents Models EPS-3001TU 10BaseT Direct AttachDescription Item Description FPS-3001TXU 100BaseT Direct AttachFPS-2111TXU FPS-2101TXU FPS-2013TXU FPS-2003TXU FPS-2101USB DIP Switches FPS-2101TXU & FPS-2003TXU LED IndicatorsDIP Switches FPS-2111TXU & FPS-2013TXU Green LED Red/Orange LED Status DescriptionDiagnostic Push Button To restore the factory default settingsTo generate a Diagnostic print out Procedure LAN InstallationFind the Default LevelOne Printer Server Name Connect the PrintersPower Up and Check Configuration Required ConfigurationConfiguration Methods & Utilities WPConfig WebAdminInstallation BiAdmin Utility ProgramRequirements Additional RecommendationsMain Screen BiAdmin Main ScreenDevice List GroupsStatus Icons Configuration IconsOther Icons Menu Options Status MenuInitDevice Menu Configuration Menu Diagnostics menuControl Menu AppleTalk AppleTalk SetupSoftware Requirements PrintingChanging the Device Configuration Advanced Setup and ManagementWindows Software Macintosh SoftwareDevice Name AppleTalk SettingsApple Zone APPCOMM1 No APPCOMM2 No APPCOMM4 NoConfiguring the LevelOne Printer Server Configuring NetWareNetWare OverviewConfiguration Methods Preparation Using BiAdmin with ClientPrint Server Mode Bindery DataButtons NetWare Configuration Button Bindery Quickset Button BinderyIf you have multiple File Servers If you have a single File Server Select Printer Port Bindery Printer ButtonAssign Queues Bindery Assigning Printer Queues RequiredTo assign operators to Queues Optional To Assign Users to Queues RequiredNetWare Password Bindery PS Mode PasswordPrint Server Mode NDS Quickset Button NDS NetWare Configuration Button NDSSelect Printer Port NDS To assign operators to the Print Queue Optional Assign Users to Queue NDS PS modeNetWare Password NDS PS Mode Password NDSRemote Printer Mode Bindery Current Context Remote Printer Mode NDSNdps NetWare OverviewCreating an Ndps Manager Object Load Ndpsm Creating an Ndps Printer AgentProcedure Workstation ConfigurationNdps Manager Client Web Browser Configuration Example UnixExample Windows Connecting to the LevelOne Printer Server Data TCP/IP Screen TCP/IP ConfigurationLogical Printer Setup Data Logical Printer ConfigurationOther Screens String Before JobOperation TelnetProcedure IP Address ConfigurationUnix Software RequirementsUsing Rarp Using BootpPrinting Methods Overview Direct Socket InterfaceLPD Printing Configuration LPD on IBM AIXFTP File Transfer Protocol Action Sample Command LPD on SystemAdding Remote Printers LPD on BSD Printing using LPD Printing Using PSfilter Printing Using DSIOther Printing Methods Logical Printer No Socket NoWindows NT Server TCP/IP LevelOne Printer Server ConfigurationHost File Entry Optional Windows NT Host ConfigurationAdding a TCP/IP Remote Printer Preparing for TCP/IP PrintingWindows NT WindowsWindows NT Server TCP/IP Command Line Printing with Windows NTWindows Applications Windows Peer-to-Peer SetupAdd Port Peer-to-peer Print Driver If your LevelOne Printer Server is not listedManagement Configure Printer PortPort Options BannerRetry Interval Internet Printing Special FeaturesSystem Requirements Mail ServerUser Client Requirements Internet Printer ServerInternet Mail Printing Configuration Installation User SoftwareUser Software Following data must be provided Checking the Printer Driver Using the new PortPrinting through the Internet Canceling a Print JobSnmp Settings Configuring the LevelOne Printer Server for SnmpManagement Station Settings Trap Receiving Station SettingsTrap Severity Troubleshooting Hardware ProblemsProblem No All the LevelOne Printer Server’s LEDs are off BiAdmin is grayed out, even though my printer in bi Problem NoPrinting General DirectionalProblem No My document didn’t print to the right printer Problem No Why do I get an incorrect printout?Problem No My file doesn’t print with the correct fonts Problem No My EPS file doesn’t print with the correct fontsLevel One Printer Servers NetWare Problem No My LevelOne Printer Server prints garbageNetWare 2.x NetWare 4.x bindery and NDS modesSet Allow service by current print servers to YES Troubleshooting Problem No PSConfig shows No Response Then select Print Server Configuration and select QueuesCannot receive Notify message in NetWare 4.x environment TCP/IP Unix & Windows NT Problem No LevelOne Printer Server device is not recognizedProblem No I can’t print using PSfilter Problem No I can’t print using LPDWindows Peer-to-peer To remove an existing printer port installationTroubleshooting Then select File Properties Details Problem No Plain text E Mails are not printed Problem No I don’t know my Mail Server’s IP AddressProblem No a print job is printing garbage Problem No Two print jobs are printing on the sameSelect Properties Details Problem No Only the banner page was printedDirect Attach Models SpecificationsEPS-3001TU FCC StatementFPS-3001TXU Parallel Port Pin Assignments Environmental SpecificationsOther Models Strobe To printer +Data Level One Printer Servers

FPS-2111TXU, FPS-2101TXU, FPS-2003TXU, FPS-2013TXU, FPS-2101USB specifications

LevelOne has established itself as a reputable brand that offers a diverse range of high-quality networking products. Among its impressive catalog, the devices EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU stand out for their unique features and capabilities tailored to meet various networking needs.

The LevelOne EPS-3001TU is an advanced PoE (Power over Ethernet) injector that enhances network efficiency by transmitting both power and data through a single cable. This device supports IEEE 802.3af PoE standards, making it compatible with a wide array of PoE-enabled devices such as IP cameras and wireless access points. With a compact design, the EPS-3001TU is easy to install and ideal for environments where space is a concern. Its LED indicators provide real-time feedback on power and data transmission, ensuring reliable performance at all times.

The FPS-2003TXU is a robust network switch designed to facilitate seamless data flow in various applications. Featuring 3 Gigabit Ethernet ports, it offers a high-speed data transfer rate that minimizes latency. Plug-and-play functionality allows for effortless integration into existing networks, while its compact and fanless design ensures quiet operation, making it suitable for office environments. The FPS-2003TXU also boasts energy-efficient technology, reducing overall power consumption without compromising performance.

The FPS-2101USB, on the other hand, combines the traditional switch functionality with USB connectivity. This unique feature allows users to easily connect USB devices directly, thereby broadening the scope of network sharing. Ideal for small offices, the FPS-2101USB supports multiple simultaneous connections, enhancing productivity and collaboration among users. The device is designed for simplicity, ensuring easy setup and management.

Similarly, the FPS-2101TXU and FPS-2111TXU are reliable managed switches that offer extensive management features and enhanced security protocols. Both models come with multiple ports for optimal connectivity and support high-definition video and voice traffic. They are equipped with VLAN support, allowing for efficient traffic segmentation and improved network performance. Moreover, their robust security features, including port security and access control lists, ensure that network integrity is maintained.

In conclusion, LevelOne's EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU devices provide a strong foundation for building and managing efficient networks. With a combination of innovative features, user-friendly design, and reliable performance, these products cater to the needs of both home and business environments, ensuring that users get the most out of their networking infrastructure.