LevelOne EPS-3001TU, FPS-2003TXU, FPS-2111TXU, FPS-2101USB Port Options, Banner, Retry Interval

Page 71

Level One Printer Servers

Port Options

The options for the Peer-to-peer Print Driver are accessed via the Port Settings button.

Use Start - Settings - Printers to open the Printers folder, then right-click the Printer, and select Properties. The Port Settings button is on the Details or Ports tab, depending on your version of Windows.

An example screen is shown below:

 

 

Figure 37: Port Settings (Peer-to-peer Driver)

Items shown on this screen are as follows:

 

 

 

 

 

Port

 

If desired, click Browse to select a different LevelOne

 

 

 

Printer Server. If the selected device has multiple ports, the

 

 

 

Select Device Port button can be used to select the port.

 

 

 

The Port Name can not be changed after installation. This

 

 

 

name is shown in the Printer's Properties.

 

 

 

 

 

Banner

 

Check this option to print a banner page before each print

 

 

 

job.

 

 

 

• If using a PostScript Printer, check the PostScript box.

 

 

 

• The User Name will be printed on the banner page.

 

 

 

 

 

Retry Interval

 

Sets how often Windows will poll the LevelOne Printer

 

 

 

Server to establish a connection when the printer is busy.

 

 

 

Increase this value if you get too many warning messages.

 

 

 

 

- 68 -

Page 70 Page 72
Image 71
Page 70 Page 72
Contents Level One Printer Servers Table of Contents Windows NT Server TCP/IP Special FeaturesTroubleshooting SpecificationsYear 2000 Compliance FeaturesIntroduction Safety Instructions Package Contents Description ModelsEPS-3001TU 10BaseT Direct Attach Item Description FPS-3001TXU 100BaseT Direct AttachFPS-2111TXU FPS-2101TXU FPS-2013TXU FPS-2003TXU FPS-2101USB Green LED Red/Orange LED Status Description LED IndicatorsDIP Switches FPS-2101TXU & FPS-2003TXU DIP Switches FPS-2111TXU & FPS-2013TXUTo generate a Diagnostic print out Diagnostic Push ButtonTo restore the factory default settings Connect the Printers LAN InstallationProcedure Find the Default LevelOne Printer Server NamePower Up and Check Configuration Methods & Utilities ConfigurationRequired Configuration WPConfig WebAdminAdditional Recommendations BiAdmin Utility ProgramInstallation RequirementsMain Screen BiAdmin Main ScreenDevice List GroupsStatus Icons Configuration IconsOther Icons InitDevice Menu Menu OptionsStatus Menu Control Menu Configuration MenuDiagnostics menu Printing AppleTalk SetupAppleTalk Software RequirementsMacintosh Software Advanced Setup and ManagementChanging the Device Configuration Windows SoftwareAPPCOMM1 No APPCOMM2 No APPCOMM4 No AppleTalk SettingsDevice Name Apple ZoneOverview Configuring NetWareConfiguring the LevelOne Printer Server NetWareConfiguration Methods Preparation Using BiAdmin with ClientButtons Print Server Mode BinderyData If you have multiple File Servers NetWare Configuration Button BinderyQuickset Button Bindery If you have a single File Server Select Printer Port Bindery Printer ButtonAssign Queues Bindery Assigning Printer Queues RequiredTo assign operators to Queues Optional To Assign Users to Queues RequiredNetWare Password Bindery PS Mode PasswordPrint Server Mode NDS Quickset Button NDS NetWare Configuration Button NDSSelect Printer Port NDS To assign operators to the Print Queue Optional Assign Users to Queue NDS PS modeNetWare Password NDS PS Mode Password NDSRemote Printer Mode Bindery Current Context Remote Printer Mode NDSCreating an Ndps Manager Object Ndps NetWareOverview Load Ndpsm Creating an Ndps Printer AgentProcedure Workstation ConfigurationNdps Manager Client Example Windows Web Browser ConfigurationExample Unix Connecting to the LevelOne Printer Server Data TCP/IP Screen TCP/IP ConfigurationString Before Job Logical Printer ConfigurationLogical Printer Setup Data Other ScreensOperation TelnetSoftware Requirements IP Address ConfigurationProcedure UnixDirect Socket Interface Using BootpUsing Rarp Printing Methods OverviewFTP File Transfer Protocol LPD Printing ConfigurationLPD on IBM AIX Adding Remote Printers Action Sample CommandLPD on System LPD on BSD Printing using LPD Logical Printer No Socket No Printing Using DSIPrinting Using PSfilter Other Printing MethodsWindows NT Server TCP/IP LevelOne Printer Server ConfigurationHost File Entry Optional Windows NT Host ConfigurationWindows Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer Windows NTWindows NT Server TCP/IP Windows Applications Command LinePrinting with Windows NT Windows Peer-to-Peer SetupAdd Port Peer-to-peer Print Driver If your LevelOne Printer Server is not listedManagement Configure Printer PortRetry Interval Port OptionsBanner Mail Server Special FeaturesInternet Printing System RequirementsUser Client Requirements Internet Printer ServerUser Software Internet Mail Printing ConfigurationInstallation User Software Following data must be provided Checking the Printer Driver Using the new PortPrinting through the Internet Canceling a Print JobTrap Receiving Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Management Station SettingsTrap Severity Problem No All the LevelOne Printer Server’s LEDs are off TroubleshootingHardware Problems Directional Problem NoBiAdmin is grayed out, even though my printer in bi Printing GeneralProblem No My EPS file doesn’t print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didn’t print to the right printer Problem No My file doesn’t print with the correct fontsLevel One Printer Servers NetWare 4.x bindery and NDS modes Problem No My LevelOne Printer Server prints garbageNetWare NetWare 2.xSet Allow service by current print servers to YES Troubleshooting Problem No PSConfig shows No Response Then select Print Server Configuration and select QueuesCannot receive Notify message in NetWare 4.x environment TCP/IP Unix & Windows NT Problem No LevelOne Printer Server device is not recognizedProblem No I can’t print using PSfilter Problem No I can’t print using LPDWindows Peer-to-peer To remove an existing printer port installationTroubleshooting Then select File Properties Details Problem No Two print jobs are printing on the same Problem No I don’t know my Mail Server’s IP AddressProblem No Plain text E Mails are not printed Problem No a print job is printing garbageSelect Properties Details Problem No Only the banner page was printedFCC Statement SpecificationsDirect Attach Models EPS-3001TUFPS-3001TXU Parallel Port Pin Assignments Environmental SpecificationsOther Models Strobe To printer +Data Level One Printer Servers

FPS-2111TXU, FPS-2101TXU, FPS-2003TXU, FPS-2013TXU, FPS-2101USB specifications

LevelOne has established itself as a reputable brand that offers a diverse range of high-quality networking products. Among its impressive catalog, the devices EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU stand out for their unique features and capabilities tailored to meet various networking needs.

The LevelOne EPS-3001TU is an advanced PoE (Power over Ethernet) injector that enhances network efficiency by transmitting both power and data through a single cable. This device supports IEEE 802.3af PoE standards, making it compatible with a wide array of PoE-enabled devices such as IP cameras and wireless access points. With a compact design, the EPS-3001TU is easy to install and ideal for environments where space is a concern. Its LED indicators provide real-time feedback on power and data transmission, ensuring reliable performance at all times.

The FPS-2003TXU is a robust network switch designed to facilitate seamless data flow in various applications. Featuring 3 Gigabit Ethernet ports, it offers a high-speed data transfer rate that minimizes latency. Plug-and-play functionality allows for effortless integration into existing networks, while its compact and fanless design ensures quiet operation, making it suitable for office environments. The FPS-2003TXU also boasts energy-efficient technology, reducing overall power consumption without compromising performance.

The FPS-2101USB, on the other hand, combines the traditional switch functionality with USB connectivity. This unique feature allows users to easily connect USB devices directly, thereby broadening the scope of network sharing. Ideal for small offices, the FPS-2101USB supports multiple simultaneous connections, enhancing productivity and collaboration among users. The device is designed for simplicity, ensuring easy setup and management.

Similarly, the FPS-2101TXU and FPS-2111TXU are reliable managed switches that offer extensive management features and enhanced security protocols. Both models come with multiple ports for optimal connectivity and support high-definition video and voice traffic. They are equipped with VLAN support, allowing for efficient traffic segmentation and improved network performance. Moreover, their robust security features, including port security and access control lists, ensure that network integrity is maintained.

In conclusion, LevelOne's EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU devices provide a strong foundation for building and managing efficient networks. With a combination of innovative features, user-friendly design, and reliable performance, these products cater to the needs of both home and business environments, ensuring that users get the most out of their networking infrastructure.
Top Page Image Contents