LevelOne FPS-2101TXU, EPS-3001TU Advanced Setup and Management, Changing the Device Configuration

Page 28

AppleTalk

Advanced Setup and Management

This section describes the configuration changes which can be made to your LevelOne Printer Server device.

Changing the Device Configuration

Windows Software

In a mixed Windows PC/Macintosh environment, you can use the BiAdmin utility program to configure the LevelOne Printer Server.

For details on installing and using BiAdmin, refer to Chapter 4 - BiAdmin.

Macintosh Software

In AppleTalk, you can use SimpleText to edit the LevelOne Printer Server’s CONFIG file and the supplied PSTool program to send it to the LevelOne Printer Server. The procedure is as follows:

1.Copy the following files from the \PS\Utility\Apple folder on the CD-ROM to an appropriate folder on your hard disk.

PSTool

CONFIG file (e.g. config.3p)

2.Use Chooser to select the desired LevelOne Printer Server.

3.Double click the CONFIG file, and edit it. The contents of the file will vary depending on your model, but will look something like the example below.

begin CMD

0001 Device Name: xxxxxxxx

3000 Apple Zone : *

3001 Printer Type (P1): LaserWriter

3002 Printer Type (P2) LaserWriter

3004 Printer Type (P3) LaserWriter

3101 AP_PCOMM1: No

3102 AP_PCOMM2: No

3104 AP_PCOMM4: No

9002

The appropriate values for each line are described in the following section.

Do NOT modify the following lines: begin CMD

9002:

4.Save the file.

5.Double click the icon for PSTool.

6.Click the Printer submenu and choose Download Postscript File. A panel will appear with a list of files.

7.Click the CONFIG file. Then click Download.

- 25 -

Image 28
Contents Level One Printer Servers Table of Contents Special Features TroubleshootingSpecifications Windows NT Server TCP/IPIntroduction FeaturesYear 2000 Compliance Safety Instructions Package Contents EPS-3001TU 10BaseT Direct Attach ModelsDescription FPS-3001TXU 100BaseT Direct Attach Item DescriptionFPS-2111TXU FPS-2101TXU FPS-2013TXU FPS-2003TXU FPS-2101USB LED Indicators DIP Switches FPS-2101TXU & FPS-2003TXUDIP Switches FPS-2111TXU & FPS-2013TXU Green LED Red/Orange LED Status DescriptionTo restore the factory default settings Diagnostic Push ButtonTo generate a Diagnostic print out LAN Installation ProcedureFind the Default LevelOne Printer Server Name Connect the PrintersPower Up and Check Required Configuration ConfigurationConfiguration Methods & Utilities WebAdmin WPConfigBiAdmin Utility Program InstallationRequirements Additional RecommendationsBiAdmin Main Screen Main ScreenGroups Device ListConfiguration Icons Status IconsOther Icons Status Menu Menu OptionsInitDevice Menu Diagnostics menu Configuration MenuControl Menu AppleTalk Setup AppleTalkSoftware Requirements PrintingAdvanced Setup and Management Changing the Device ConfigurationWindows Software Macintosh SoftwareAppleTalk Settings Device NameApple Zone APPCOMM1 No APPCOMM2 No APPCOMM4 NoConfiguring NetWare Configuring the LevelOne Printer ServerNetWare OverviewConfiguration Methods Using BiAdmin with Client PreparationData Print Server Mode BinderyButtons Quickset Button Bindery NetWare Configuration Button BinderyIf you have multiple File Servers If you have a single File Server Printer Button Select Printer Port BinderyAssigning Printer Queues Required Assign Queues BinderyTo Assign Users to Queues Required To assign operators to Queues OptionalPassword NetWare Password Bindery PS ModePrint Server Mode NDS NetWare Configuration Button NDS Quickset Button NDSSelect Printer Port NDS Assign Users to Queue NDS PS mode To assign operators to the Print Queue OptionalPassword NDS NetWare Password NDS PS ModeRemote Printer Mode Bindery Remote Printer Mode NDS Current ContextOverview Ndps NetWareCreating an Ndps Manager Object Creating an Ndps Printer Agent Load NdpsmWorkstation Configuration ProcedureNdps Manager Client Example Unix Web Browser ConfigurationExample Windows Connecting to the LevelOne Printer Server TCP/IP Configuration Data TCP/IP ScreenLogical Printer Configuration Logical Printer Setup DataOther Screens String Before JobTelnet OperationIP Address Configuration ProcedureUnix Software RequirementsUsing Bootp Using RarpPrinting Methods Overview Direct Socket InterfaceLPD on IBM AIX LPD Printing ConfigurationFTP File Transfer Protocol LPD on System Action Sample CommandAdding Remote Printers LPD on BSD Printing using LPD Printing Using DSI Printing Using PSfilterOther Printing Methods Logical Printer No Socket NoLevelOne Printer Server Configuration Windows NT Server TCP/IPWindows NT Host Configuration Host File Entry OptionalPreparing for TCP/IP Printing Adding a TCP/IP Remote PrinterWindows NT WindowsWindows NT Server TCP/IP Printing with Windows NT Command LineWindows Applications Setup Windows Peer-to-PeerIf your LevelOne Printer Server is not listed Add Port Peer-to-peer Print DriverConfigure Printer Port ManagementBanner Port OptionsRetry Interval Special Features Internet PrintingSystem Requirements Mail ServerInternet Printer Server User Client RequirementsInstallation User Software Internet Mail Printing ConfigurationUser Software Following data must be provided Using the new Port Checking the Printer DriverCanceling a Print Job Printing through the InternetConfiguring the LevelOne Printer Server for Snmp Snmp SettingsManagement Station Settings Trap Receiving Station SettingsTrap Severity Hardware Problems TroubleshootingProblem No All the LevelOne Printer Server’s LEDs are off Problem No BiAdmin is grayed out, even though my printer in biPrinting General DirectionalProblem No Why do I get an incorrect printout? Problem No My document didn’t print to the right printerProblem No My file doesn’t print with the correct fonts Problem No My EPS file doesn’t print with the correct fontsLevel One Printer Servers Problem No My LevelOne Printer Server prints garbage NetWareNetWare 2.x NetWare 4.x bindery and NDS modesSet Allow service by current print servers to YES Troubleshooting Then select Print Server Configuration and select Queues Problem No PSConfig shows No ResponseCannot receive Notify message in NetWare 4.x environment Problem No LevelOne Printer Server device is not recognized TCP/IP Unix & Windows NTProblem No I can’t print using LPD Problem No I can’t print using PSfilterTo remove an existing printer port installation Windows Peer-to-peerTroubleshooting Then select File Properties Details Problem No I don’t know my Mail Server’s IP Address Problem No Plain text E Mails are not printedProblem No a print job is printing garbage Problem No Two print jobs are printing on the sameProblem No Only the banner page was printed Select Properties DetailsSpecifications Direct Attach ModelsEPS-3001TU FCC StatementFPS-3001TXU Environmental Specifications Parallel Port Pin AssignmentsOther Models Strobe To printer +Data Level One Printer Servers

FPS-2111TXU, FPS-2101TXU, FPS-2003TXU, FPS-2013TXU, FPS-2101USB specifications

LevelOne has established itself as a reputable brand that offers a diverse range of high-quality networking products. Among its impressive catalog, the devices EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU stand out for their unique features and capabilities tailored to meet various networking needs.

The LevelOne EPS-3001TU is an advanced PoE (Power over Ethernet) injector that enhances network efficiency by transmitting both power and data through a single cable. This device supports IEEE 802.3af PoE standards, making it compatible with a wide array of PoE-enabled devices such as IP cameras and wireless access points. With a compact design, the EPS-3001TU is easy to install and ideal for environments where space is a concern. Its LED indicators provide real-time feedback on power and data transmission, ensuring reliable performance at all times.

The FPS-2003TXU is a robust network switch designed to facilitate seamless data flow in various applications. Featuring 3 Gigabit Ethernet ports, it offers a high-speed data transfer rate that minimizes latency. Plug-and-play functionality allows for effortless integration into existing networks, while its compact and fanless design ensures quiet operation, making it suitable for office environments. The FPS-2003TXU also boasts energy-efficient technology, reducing overall power consumption without compromising performance.

The FPS-2101USB, on the other hand, combines the traditional switch functionality with USB connectivity. This unique feature allows users to easily connect USB devices directly, thereby broadening the scope of network sharing. Ideal for small offices, the FPS-2101USB supports multiple simultaneous connections, enhancing productivity and collaboration among users. The device is designed for simplicity, ensuring easy setup and management.

Similarly, the FPS-2101TXU and FPS-2111TXU are reliable managed switches that offer extensive management features and enhanced security protocols. Both models come with multiple ports for optimal connectivity and support high-definition video and voice traffic. They are equipped with VLAN support, allowing for efficient traffic segmentation and improved network performance. Moreover, their robust security features, including port security and access control lists, ensure that network integrity is maintained.

In conclusion, LevelOne's EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU devices provide a strong foundation for building and managing efficient networks. With a combination of innovative features, user-friendly design, and reliable performance, these products cater to the needs of both home and business environments, ensuring that users get the most out of their networking infrastructure.