LevelOne FPS-2013TXU, FPS-2003TXU, FPS-2111TXU, FPS-2101USB manual Following data must be provided

Page 75

Level One Printer Servers

Directory - C:\Program Files\Internet_Printer

Start Menu folder - InterNet Printing Port Driver

3.You will then see the Configure Port screen, as shown in the following screenshot.

Figure 38: InterNet Printer Port

4.The following data must be provided.

Port Name

Enter a descriptive name (e.g. “WAN”) for the new printer

 

port.

 

 

Remote Printer

The E Mail address for the Internet printer. Your print jobs

E-mail Address

will be sent to this E Mail address.

 

 

Mail Server Name

This is the name or IP Address of your Mail Server. If you

or IP Address

are on a LAN, ask the LAN Administrator. If using a dial-

 

up connection, use the data provided by your ISP.

 

 

Your Internet

The normal address that people use to send you E-mail.

E-mail Address

 

 

 

Retry Interval

If unable to connect to the E Mail server, retry after this

(Seconds)

time period (1 to 255 seconds, 30 is usually OK).

 

 

Reply Notification

Check to receive an E Mail when your print job has been

Mail

processed.

 

 

5.On completion, a new printer port will have been created.

- 72 -

Image 75
Contents Level One Printer Servers Table of Contents Windows NT Server TCP/IP Special FeaturesTroubleshooting SpecificationsFeatures IntroductionYear 2000 Compliance Safety Instructions Package Contents Models EPS-3001TU 10BaseT Direct AttachDescription Item Description FPS-3001TXU 100BaseT Direct AttachFPS-2111TXU FPS-2101TXU FPS-2013TXU FPS-2003TXU FPS-2101USB Green LED Red/Orange LED Status Description LED IndicatorsDIP Switches FPS-2101TXU & FPS-2003TXU DIP Switches FPS-2111TXU & FPS-2013TXUDiagnostic Push Button To restore the factory default settingsTo generate a Diagnostic print out Connect the Printers LAN InstallationProcedure Find the Default LevelOne Printer Server NamePower Up and Check Configuration Required ConfigurationConfiguration Methods & Utilities WPConfig WebAdminAdditional Recommendations BiAdmin Utility ProgramInstallation RequirementsMain Screen BiAdmin Main ScreenDevice List GroupsStatus Icons Configuration IconsOther Icons Menu Options Status MenuInitDevice Menu Configuration Menu Diagnostics menuControl Menu Printing AppleTalk SetupAppleTalk Software RequirementsMacintosh Software Advanced Setup and ManagementChanging the Device Configuration Windows SoftwareAPPCOMM1 No APPCOMM2 No APPCOMM4 No AppleTalk SettingsDevice Name Apple ZoneOverview Configuring NetWareConfiguring the LevelOne Printer Server NetWareConfiguration Methods Preparation Using BiAdmin with ClientPrint Server Mode Bindery DataButtons NetWare Configuration Button Bindery Quickset Button BinderyIf you have multiple File Servers If you have a single File Server Select Printer Port Bindery Printer ButtonAssign Queues Bindery Assigning Printer Queues RequiredTo assign operators to Queues Optional To Assign Users to Queues RequiredNetWare Password Bindery PS Mode PasswordPrint Server Mode NDS Quickset Button NDS NetWare Configuration Button NDSSelect Printer Port NDS To assign operators to the Print Queue Optional Assign Users to Queue NDS PS modeNetWare Password NDS PS Mode Password NDSRemote Printer Mode Bindery Current Context Remote Printer Mode NDSNdps NetWare OverviewCreating an Ndps Manager Object Load Ndpsm Creating an Ndps Printer AgentProcedure Workstation ConfigurationNdps Manager Client Web Browser Configuration Example UnixExample Windows Connecting to the LevelOne Printer Server Data TCP/IP Screen TCP/IP ConfigurationString Before Job Logical Printer ConfigurationLogical Printer Setup Data Other ScreensOperation TelnetSoftware Requirements IP Address ConfigurationProcedure UnixDirect Socket Interface Using BootpUsing Rarp Printing Methods OverviewLPD Printing Configuration LPD on IBM AIXFTP File Transfer Protocol Action Sample Command LPD on SystemAdding Remote Printers LPD on BSD Printing using LPD Logical Printer No Socket No Printing Using DSIPrinting Using PSfilter Other Printing MethodsWindows NT Server TCP/IP LevelOne Printer Server ConfigurationHost File Entry Optional Windows NT Host ConfigurationWindows Preparing for TCP/IP PrintingAdding a TCP/IP Remote Printer Windows NTWindows NT Server TCP/IP Command Line Printing with Windows NTWindows Applications Windows Peer-to-Peer SetupAdd Port Peer-to-peer Print Driver If your LevelOne Printer Server is not listedManagement Configure Printer PortPort Options BannerRetry Interval Mail Server Special FeaturesInternet Printing System RequirementsUser Client Requirements Internet Printer ServerInternet Mail Printing Configuration Installation User SoftwareUser Software Following data must be provided Checking the Printer Driver Using the new PortPrinting through the Internet Canceling a Print JobTrap Receiving Station Settings Configuring the LevelOne Printer Server for SnmpSnmp Settings Management Station SettingsTrap Severity Troubleshooting Hardware ProblemsProblem No All the LevelOne Printer Server’s LEDs are off Directional Problem NoBiAdmin is grayed out, even though my printer in bi Printing GeneralProblem No My EPS file doesn’t print with the correct fonts Problem No Why do I get an incorrect printout?Problem No My document didn’t print to the right printer Problem No My file doesn’t print with the correct fontsLevel One Printer Servers NetWare 4.x bindery and NDS modes Problem No My LevelOne Printer Server prints garbageNetWare NetWare 2.xSet Allow service by current print servers to YES Troubleshooting Problem No PSConfig shows No Response Then select Print Server Configuration and select QueuesCannot receive Notify message in NetWare 4.x environment TCP/IP Unix & Windows NT Problem No LevelOne Printer Server device is not recognizedProblem No I can’t print using PSfilter Problem No I can’t print using LPDWindows Peer-to-peer To remove an existing printer port installationTroubleshooting Then select File Properties Details Problem No Two print jobs are printing on the same Problem No I don’t know my Mail Server’s IP AddressProblem No Plain text E Mails are not printed Problem No a print job is printing garbageSelect Properties Details Problem No Only the banner page was printedFCC Statement SpecificationsDirect Attach Models EPS-3001TUFPS-3001TXU Parallel Port Pin Assignments Environmental SpecificationsOther Models Strobe To printer +Data Level One Printer Servers

FPS-2111TXU, FPS-2101TXU, FPS-2003TXU, FPS-2013TXU, FPS-2101USB specifications

LevelOne has established itself as a reputable brand that offers a diverse range of high-quality networking products. Among its impressive catalog, the devices EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU stand out for their unique features and capabilities tailored to meet various networking needs.

The LevelOne EPS-3001TU is an advanced PoE (Power over Ethernet) injector that enhances network efficiency by transmitting both power and data through a single cable. This device supports IEEE 802.3af PoE standards, making it compatible with a wide array of PoE-enabled devices such as IP cameras and wireless access points. With a compact design, the EPS-3001TU is easy to install and ideal for environments where space is a concern. Its LED indicators provide real-time feedback on power and data transmission, ensuring reliable performance at all times.

The FPS-2003TXU is a robust network switch designed to facilitate seamless data flow in various applications. Featuring 3 Gigabit Ethernet ports, it offers a high-speed data transfer rate that minimizes latency. Plug-and-play functionality allows for effortless integration into existing networks, while its compact and fanless design ensures quiet operation, making it suitable for office environments. The FPS-2003TXU also boasts energy-efficient technology, reducing overall power consumption without compromising performance.

The FPS-2101USB, on the other hand, combines the traditional switch functionality with USB connectivity. This unique feature allows users to easily connect USB devices directly, thereby broadening the scope of network sharing. Ideal for small offices, the FPS-2101USB supports multiple simultaneous connections, enhancing productivity and collaboration among users. The device is designed for simplicity, ensuring easy setup and management.

Similarly, the FPS-2101TXU and FPS-2111TXU are reliable managed switches that offer extensive management features and enhanced security protocols. Both models come with multiple ports for optimal connectivity and support high-definition video and voice traffic. They are equipped with VLAN support, allowing for efficient traffic segmentation and improved network performance. Moreover, their robust security features, including port security and access control lists, ensure that network integrity is maintained.

In conclusion, LevelOne's EPS-3001TU, FPS-2003TXU, FPS-2101USB, FPS-2101TXU, and FPS-2111TXU devices provide a strong foundation for building and managing efficient networks. With a combination of innovative features, user-friendly design, and reliable performance, these products cater to the needs of both home and business environments, ensuring that users get the most out of their networking infrastructure.