Lantronix LX6 Icmp and ICMPv6 Settings, To Configure Icmp Network Stack Settings, ARP Settings

10: Maintenance and Diagnostics Settings

ICMP and ICMPv6 Settings

	Table 10-5 ICMP Network Stack Settings
Protocol Stack		Description
ICMP Settings
State		The State selection is used to turn on/off processing of ICMP messages.
		This includes both incoming and outgoing messages. Choose Enabled or
		Disabled.

To Configure ICMP Network Stack Settings

Using Web Manager

To configure ICMP protocol settings, click Protocol Stack in the menu and select ICMP.

Using the CLI

To enter the command level: enable -> config -> icmp

Using XML

Include in your file: <configgroup name=”icmp”>

To View ICMPv6 Network Stack Settings

Using Web Manager

To view ICMPv6 protocol settings, click Protocol Stack in the menu and select ICMPv6.

Using the CLI

Not applicable.

Using XML

Not applicable.

ARP Settings

	Table 10-6 ARP Network Stack Settings
Protocol Stack	Description
ARP Settings
IP Address	Enter the IPv4 address to add to the ARP cache.
MAC Address	Enter the MAC address to add to the ARP cache.
Remove	Click the Remove link beside a specific address to remove it.
Remove All	Click the Remove All link underneath all listed addresses to remove all the addresses.

XPort® Pro Lx6 Embedded Device Server User Guide 51