Lantronix LX6 Command Line Interface Settings, Basic CLI Settings, CLI Configuration Settings

11: Advanced Settings

Using XML

Include in your file: <configgroup name=”email” instance=”1”>

Command Line Interface Settings

The Command Line Interface settings allow you to control how users connect to and interact with the command line of the XPort Pro Lx6 embedded device server. It is possible to configure access via the Telnet protocols, in addition to general CLI options.

Basic CLI Settings

The basic CLI settings control general CLI access and usability options.

	Table 11-2 CLI Configuration Settings
Command Line Interface	Description
Configuration Settings
Login Password	Enter the password for logins by the admin account. “PASS” is the default
	password.
Enable Level Password	Enter the password for access to the Command Mode Enable level. There is
	no password by default.
Quit Connect Line	Enter the Quit Connect Line string to be used to terminate a Telnet session
	and resume the CLI. Type <control> before the key to be pressed while
	holding down the [Ctrl] key (example: <control>L)
Inactivity Timeout	Set a time period in which the CLI session should disconnect if no data is
	received. Enter 0 to disable. Blank the display field to restore the default.
Line Authentication	Enable or Disable authentication for CLI access on the .

To View and Configure Basic CLI Settings

Using Web Manager

To view CLI statistics, click CLI in the menu and select Statistics.

To configure basic CLI settings, click CLI in the menu and select Configuration.

Using the CLI

To enter CLI command level: enable -> config -> cli

Using XML

 Include in your file: <configgroup name=”cli”>

XPort® Pro Lx6 Embedded Device Server User Guide 60