7:Terminal and Host Settings
Predefined connections are available via Telnet or a serial port. A user can choose one of the presented options and the device automatically makes the predefined connection.
Either the Telnet or serial port connection can present the CLI or the Login Connect Menu. By default, the CLI is presented when the device is accessed. When configured to present the Login Connect Menu, the hosts configured via the Host selections, and named serial lines are presented.
Terminal Settings
You can configure whether each serial line or the Telnet server presents a CLI or a Login Connect menu when a connection is made.
Table 7-1 Terminal on Network and Line Settings
Terminal on Network | Description |
and Line Settings |
|
Terminal Type | Enter text to describe the type of terminal. The text will be sent to a host via IAC. |
| Note: IAC means, “interpret as command.” It is a way to send commands over |
| the network such as send break or start echoing. |
Login Connect Menu | Select the interface to display when the user logs in. Choices are: |
| Enabled = shows the Login Connect Menu. |
| Disabled = shows the CLI (default) |
Exit Connect Menu | Select whether to display a choice for the user to exit the Login Connect Menu |
| and reach the CLI. Choices are: |
| Enabled = a choice allows the user to exit to the CLI. |
| Disabled = there is no exit to the CLI (default) |
Send Break | Enter a Send Break control character, e.g., <control> Y, or blank to disable. |
| When the Send Break control character is received from the network on its way |
| to the serial line, it is not sent to the line; instead, the line output is forced to be |
| inactive (the break condition). |
| Note: This configuration option is only available for Line Terminals. |
Break Duration | Enter how long the break should last in milliseconds, up to 10000. Default is |
| 500. |
| Note: This configuration option is only available for Line Terminals. |
Echo | Select whether to enable echo: |
| Enabled |
| Disabled |
| Note: Applies only to Connect Mode Telnet connections, not to Accept Mode. |
| Only disable Echo if your terminal echoes, in which case you will see double of |
| each character typed. Default is enabled. |
|
|
XPort® Pro Lx6 Embedded Device Server User Guide | 38 |